Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

24V 5M Amber 5050 300 LED Strip kit

CODE: AMB24V5M

$71.93

In stock

24V 5M Amber 5050 300 LED Strip kit

Create the warmest of ambiance with the 1800k 5050 LED Strip from LED Montreal. This 24V LED Strip is recommended for bars and lounge looking to offer a soothing, antique ambiance to their clientele at an affordable price. Offered in a 5m roll, it features a self adhesive backing and can be cut at every 6 LEDs (10 cm). Its iP65 waterproofing rating gives it the splash resistance bar owners are looking for. The 24V circuit of the Amber 5050 LED Strip allows you to install 2 Strips in series (back to back) and still achieve a bright, consistent lighting.  

Speaking of brightness, this 60 LEDs per meter Amber LED Strip will give you an output of 750 lumens per meter. And don’t worry if you feel that this may be a bit bright for your application as the Amber LED Strip is fully dimmable through one of our DC dimmer or AC dimmable LED Driver.  

Please note that we recommend using at least 14W (at 24V) per meter to properly power this Amber LED Strip and to install it on an aluminum surface (or inside an aluminum profile) if you intend on using the 1800k 5050 LED Strip for extended periods of time at full brightness.

Use of Adhesive Tape
If you're planning on installing your LED strip sideways or upside down, we strongly suggest using extra adhesive such as the Double Sided 3M 9495LE Tape for LED Strips.
       
For porous surfaces, outdoor usage, wet and marine environments or usage with IP 68 strips, we suggest using the Double Sided 3M Acrylic Tape for LED Strips.
   
WARNING: Do not use the Double Sided 3M Acrylic Tape on 3014 LED Strips or for more than 4 consecutive hours at full intensity (or commercially used) 5050 Led Strips, as there could be a risk of damage to the LED strip.

Specification Amber LED Strip:

iP65 LED Strip with 3M adhesive
For indoor use only
5M roll, 60LED/m. 300 LED total
Lighting Angle: 120°
Amber (1800K)
Can be cut: every 6 LED (10cm)
Strip width: 10mm
Required Power: 14W/m at 24V
Luminus flux: 750lm/m

No FAQ found, submit a question!

Loading...