Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

24V 5 to 10m Single Color 5050 300 LED Strip kit

CODE: SC24V510

$68.14

In stock

Epistar Single Color 5 to 10 Meter 5050 LED Strip kit

LED Montreal is proud to introduce the 5050 Epistar Single Color LED Strip in 5 to 10 meter length. The Epistar Single Color 10 Meter 5050 LED Strip kit allows you to create a 32 feet long super bright LED lighting that is controlled by a unique RF dimmer. The three LEDs contained in each of the 60 chips per meter (300 LEDs total per Strip) found on this Strip produce a brightness of up to 850 lumens per meter .

The optionnal Radio Frequency (RF) controller and 11 key remote available with this state of the art kit allow you to control your LED Strip from a distance up 30 meters. As RF technology does not require a visible sensor, you can easily hide the controller anywhere. You can even dim your LED Strip Kit or use one of 6 included flashing mode from a different room or even from outside your house, thanks to the sleek 11 key RF remote control. Wishing to operate several kit with the same remote ? Simply choose to upgrade to the Multi Zone kit and you're all set.

The Epistar Single Color 10 Meter 5050 LED Strip kit was designed to perform with the provided parts, including the high capacity controller. Do not try to replace the controller or the power supply with generic parts as it may damage your Strip.

Ideal to really light up under your kitchen cabinets or to enhance any store display, the Epistar Single Color 10 Meter 5050 LED Strip kit features self adhesive iP65 splash proof silicone-covered strips. You can select the color temperature in the drop down menu (Warm White: 3000K, Natural White: 4500K or Cool White 6000K). 

Use of Adhesive Tape
If you're planning on installing your LED strip sideways or upside down, we strongly suggest using extra adhesive such as the Double Sided 3M 9495LE Tape for LED Strips.
       
For porous surfaces, outdoor usage, wet and marine environments or usage with IP 68 strips, we suggest using the Double Sided 3M Acrylic Tape for LED Strips.
   
WARNING: Do not use the Double Sided 3M Acrylic Tape on 3014 LED Strips or for more than 4 consecutive hours at full intensity (or commercially used) 5050 Led Strips, as there could be a risk of damage to the LED strip.

PLEASE NOTE: The 10m kit is powered by a strong 4.75A, 114W power supply, it is only compatible with the optionnal dimmers. Do not attempt to connect a different controller to this kit. 24V circuitry allows you to connect your 2 Strips back to back without any loss in brightness.

Ip65 Strip with 3M adhesive
Suitable for indoor usage
Dimensions: 5 meter long, 1.0cm wide and 0.3cm thick
5 meter strip, 60 LEDs per meter, 300 LEDs in total
Required Power: 24V, 9.6W/m
Can be cut every 6 LED (20 cm)
LED type: 5050 SMD
Lighting angle : 120 degrees
Luminous intensity:850 lm/m
Available Colors: Warm White (3000k), Natural White (4500k), Cool White (6000k)

No FAQ found, submit a question!

Loading...