Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

5 Meter Submersible ip68 300 3528 LED Warm White Strip

CODE: SC300WW5M68

$60.57

In stock

5 Meter Submersible ip68 300 3528 LED Warm White Strip

Unlike ip65 strips that are waterproof on 3 sides, ip68 strips are encased in a thick clear tube filled with silicon. Our ip68 LED strips are completely water proof. It’s the ideal LED strip for outdoor usage, for the boat, the RV or even for inside an aquarium. ip68 strips are submersible in up to 10 meters of water.

The iP68 strips are not self adhesive, to maintain them in place we suggest using GE pure silicone and double-sided adhesive tape. Simply put the silicone on the back of the strip, then put the double-sided tape on top of the silicone. Once the silicone is dry, your strip is ready to install! Additional option when looking for a sharp and subtle way to hold your ip68 LED strips, the Silicone Mounting Brackets for LED Strips from LED Montreal are a great solution.

Note that only the LED strip is water proof, the connectors at both ends of the strip, the controller and power supply are not waterproof and must not be in contact with water or moisture. ip68 strips are not self adhesive, to maintain them in place we suggest using silicon or glass glue for aquariums.

Dimensions: 5 meter long, 1.2cm wide and 0.5cm thick

Single color LED Strips are often referred to as 3528 LEDs because of the size of the LED modules inside the strip. Each of the 300 LED chips in this strip measures 3.5mm by 2.8mm, that’s why they are called 3528 LEDs/p>

Waterproof (IP65, Silicon injection) with 3M Adhesive Tape on the back of the LED Strip
Suitable for indoor and outdoor usage (-10 to 40°C)
5 meter strip, 60 LEDs per meter, 300 LEDs in total
LED type: 3528 SMD (Surface Mount LED)
Luminous intensity (mcd): 650
Can come with a dimmer with a wireless controller

Package Includes:
1-5 meter 300 ip68 LED Strip (WARM WHITE)
1-Power adaptor (12V 3A)
1-Power cable

Note about the 3 key dimmer:
If the dimmer is not connected properly, the strip will turn on but the remote won’t work. In order for the remote to work, you need to connect the power supply in the dimmers INPUT, the strip connects in the OUTPUT. If once connected properly the remote doesn’t work, keep the on/off button pushed down for about 30 secs, till the strips starts blinking. That will resync the dimmer with the remote.

How does the adapter plug into the dimmer ? There is only a spot for wires to be inserted

Asked by Shelly | 07/10/2014, 15:38 | 1 answer(s)

Can this strip be cut down to size? Can these light be left outside over a Winnipeg winter where we see temperatures below -30?

Asked by Daniel Melendez | 06/14/2013, 12:11 | 1 answer(s)
Loading...