Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

24V IP68 10 to 20m 300 RGB LED Strip Kit with Outdoor Driver

CODE: IP68RGB24VK

$223.45

In stock

24V IP68 300 RGB LED Strip Kit with Outdoor Driver - 10 to 20m

Want the best, most colorful outdoor LED lighting setup? The IP68 300 5050 RGB LED Strip Kit with Outdoor Driver from LED Montreal is what you need in order to impress all your neighbours!  The included weatherproof  Mean Well Outdoor driver, lets you  hardwire your strip kit to your 120V power source and install it all outside. The driver features an output wire of 14 gauge, allowing you to use longer extensions between your driver and your controller (up to 20 meters with 14 gauge wire), giving more flexibility on where to get your power from. With its robust cover and waterproof connections and cables, it is your best option to power the Super Bright RGB iP68 LED Strip kit that you want to install to your patio, poolside, gazebo, rv, trailer, boat, cottage or anything outside!

The kit comes with our high end Radio Frequency Multi Zone controller, that doesn't require that you to point at the controller with the remote for it to work properly. It is very simple to install and it gives you the possibility of controlling your RGB LED Strip from a distance up to 30 meters. To sufficiently protect your controller, we suggest using a Weatherproof Project Box.

The drop down will allow you to pick your preferred length of LED strip to perfectly match your needs!
About the Outdoor driver: This power supply is rated iP65 or better, which means it is waterproof and safe to put outside. Keep in mind that the connections are not waterproof and need to be protected. The 24V power supplies provide constant 24V current and feature two distinct ports for input and output: the 120V AC input has 3 wire connections: one for the live wire, one for the neutral wire and one for the ground. The 24V DC output features 2 connections: one positive and one negative, provided with 14 gauge wires. We will provide you for the accurate power supply for the kit you have chosen. Always install your driver vertically.

Compliant with worldwide safety regulations for lighting, our Mean Well  hard wired power supplies have been the electrician’s choice for several years!

This single output power supply has integrated protection from short circuits, over current and over voltage as well as over temperature. All circuitry of the power supply is concealed inside a fully isolated aluminum case that is cooled by free air convection.

Important Note: The 24V power supplies are not compatible with AC dimmers. You will, however be able to dim your RGB Strip with the provided remote control.

About the iP68 Strips: This kits includes iP68 RGB Strips with 60 5050 LEDS per meter. The Strip can be cut at every 6 LEDs to better suit your project. Each Strip has a length of 5 meters. If you order a 10 meter kit, you will receive 2 x 5m Strips. You can connect a maximum of 2 Strips in series. If you plan on getting a kit of 15 or 20 meters, you will be provided with a T shape Splitter in order to connect your two series in parallel.
Note that only the LED strip is water proof, the connectors at both ends of the strip are not waterproof and must not be in contact with water or moisture. You can use extra silicon and heat shrink tube to make your setup safer.

The iP68 strips are not self-adhesive, to maintain them in place we suggest using GE pure silicone and double-sided adhesive tape. Simply put the silicone on the back of the strip, and then put the double-sided tape on top of the silicone. Once the silicone is dry, your strip is ready to install! Additional option when looking for a sharp and subtle way to hold your ip68 LED strips; the Silicone Mounting Brackets for LED Strips from LED Montreal are a great solution.

If you are looking to install ip68 submersible LED strips to your awning, pool, deck, RV, boat, docks, or anything of that nature, we invite you to read our page on how to install your under awning LED strips.

ABOUT THE DRIVER'S INSTALLATION: Since the Outdoor Driver has to be hardwired into your existing 110-120V power, it requires to be installed by a qualified professional.

RGB 300 Strip
iP68 LED Strip (submersible)
For indoor and outdoor use
5M roll, 60LED/m. 300 LED total per roll
Can be cut: Every 6 LED (10 cm)
Required Power: 10W/m at 24V max
LED Type: 5050

 

No FAQ found, submit a question!

Loading...