Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

Magnetic Dimmable LED Driver 180W (3x60w Output)



In stock

Magnetic Dimmable LED Driver 180W (3x60w Output) 

You can now fully control multiple 12V LED strips intensity through a compatible AC 120V wall dimmer with the Multi Output Magnitude Dimmable Magnetic LED Driver. In other words, this revolutionary LED Driver will allow you to dim your single color LED Strips the same way you dim your other lights in the house, with a Low Voltage Magnetic dimmer that will look like the other dimmers you have for your household lights, eliminating the need the traditional LED remote controlled dimmer. Highly efficient, this LED Driver allows you to dim your LED Strips from 100% all the way down to 10%.

The Multi Output Magnetic LED Driver features 3 x 60W outputs that allow you to control up to 3X 10 meters of 3528 LED Strip with the same dimmer. This LED Driver offers an optional boost tap wire that will boost your voltage by 10% which can compensate for voltage loss between the driver and the Strip when using longer lengths of wire between the two components. Simply substitute the black wire by the orange boost-tap wire when setting up your circuit to benefit from the voltage boost. 

This state of the art LED Driver is legendary among electricians for its reliability and durability. As a matter of fact, it’s so durable that its Nema 3R Enclosure makes it suitable for both indoors and outdoors usage. It is equipped with two auto-reset breakers, one on the input and one on the output, which protect both the load and driver. The driver is encased in a coated metal box that includes 2 knock-outs, one on each side, to enable easy installation that complies with electrical code requirements. Given that this equipment is hard wired to your 120V home circuit, it must be installed by a certified professional.

For outdoor installation: We recommend installing the power supply vertically, away from the elements. As well, you should use waterproof cable plugs to seal the knockout holes in order to complete the waterproofing process.

The Dimmable LED Driver is available in 3 X 60W that allows you to connect 3X10 meters of 3528 Strip or 3X5 meters of 5050 LED Strip. 

Each individual terminal block is protected with auto circuit breaker; therefore each terminal must be independently operated and may not be used in series or parallel to each other.

In order to ensure full dimmer compatibility, we recommend using the Leviton 6613-PLW Magnetic Low Voltage Dimmer or a Low Voltage Magnetic Dimmer from the enclosed list. Any attempt to operate this power supply with a non compatible dimmer may damage the unit and will void its warranty.  

PDF Iconinstallation_guide_12V.pdf  PDF IconDimmer Compatibility List.pdf 
PDF IconSpecsheet 180W.pdf

Technical Specification:
Max Load 60W per port X 3
Input Voltage  120V AC
Max Output Current Full Load 5.9A per port
Open Circuit Output Voltage 12.2V DC
Circuit Breakers : Primary and secondary auto reset
Usage environment : Indoor or outdoor
Dimensions 249mmx 76mm x 76mm
Weight: 3.1 kg

Connection Diagram Magnetic Dimmable Power Supply

No FAQ found, submit a question!