Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

12V iP65 5 Meter 3528 LED Strip 120 LED/m (strip only)

CODE: 35281212065

$45.42

In stock
Quantity  10+   40+ 
Price per unit  $41.63   $37.84 

12V iP65 5 Meter 3528 LED Strip 120 LED/m (strip only)

Offered in Warm White (3000K), Natural White (4500K), Cool White (6000K) the 3528 led strip is great for adding lighting to a room (still requires a main light) and under cabinet lighting. 

The technical stuff: the chips on this Strip are called 3528 because they measure 3.5mm x 2.8mm. These Chips give a 120-degree light beam and a light output of 850 lumens per meter (lumens output only applies to white Strips). The 12V 3528 Single Color Strip features an iP65 Plus silicone coating that makes the Strip easy to clean while protecting it from humidity and liquid damage. The iP65 Plus coating will not crack or deteriorate over time, like lower end silicon glue coating would. 

Your LED Strip is equipped with a high-quality 3M adhesive. This adhesive is intended for installation on a clean, non-glossy metallic surface. LED Strips were not designed to be installed on varnished or glossy wood surfaces. For porous surfaces, wet and marine environments or usage with IP 67 strips, we suggest using the Double Sided 3M Acrylic Tape for LED Strips.

This Single Color 12V Led Strip is cULus Listed. This means that is has been tested for electrical safety according to Canadian Standards when powered with a compliant Class 2 Power supply. It also means that it will pass the toughest building inspections both in Canada and the USA. 

Forecast a power supply at 12VDC of 12W (1A) per meter for your installation. As stated earlier, this strip comes in a 5m spool and is equipped with a DC female connector at the beginning of the strip and two wires at the end. If you need space between the power supply and the strip, you will be pleased to learn that it is fully compatible with our 1 m or 2m DC extension for an easy plug and play installation.

You can customize your LED Lighting set up as this Strip can be cut every 3 LEDS. The 5m 3528 Strip is flexible vertically but cannot be bent horizontally. Should you need to bypass an obstacle or turn a corner, we recommend removing the iP65 Plus sleeve with an x-acto knife and solder 2 strand wire onto your Strip. Soldering ensures a solid connection and minimal voltage loss. 

The 120 LEDs 12V 3528 iP65 5m Single Color LED Strip is fully dimmable. You can either dim it through a remote control or a wall panel with one of our low voltage dimmers or you can dim it using an LED compatible wall dimmer when combined with one of our dimmable power supplies

 

Specifications: 

Brand: CDNLUX
Model: MTL-FP8AEWK-120AXW
Certification: cULus E498952
Voltage available: 12VDC
Chip: Epistar 3528 SMD
120 LED chips per meter
Lighting angle: 120 degrees
Can be cut: All 3 LEDs (2.5cm)
Strip Width: iP65: 10mm
Self-adhesive
Power consumption: 9.6W / meter
Recommended transformer: 12W/ meter, must be powered by a Class 2 transformer
Typical luminous flux: 850 lumens/m (will vary depends on Kelvin Degrees chosen)
Available colors: 3000K / 4500K / 6000K
Operation temperature: 40C to -10C
Suitable for dry, damp and wet environment
Dimmable: Yes, through a remote/ wall panel or dimmable power supply
Heat Dissipation: Not necessary, unless used in a commercial environment

Fields of Application: They are great for adding lighting to a room (still requires a main light ) and under cabinet lighting. These ultra bright LEDs are great when installed inside our continuous lighting channels as the channel removes the hot spot effect (dot effect) to render a smooth and steady light that you would see in a neon tube.

No FAQ found, submit a question!

Loading...