24V 5m iP20 3014 Warm White Cool White Adjustable LED Strip - 240 LEDs/m (Strip Only)

24V 5m iP20 3014 Warm White Cool White Adjustable LED Strip - 240 LEDs/m (Strip Only)

Unable to decide whether you should get your next LED Strip in warm, natural or cool white, or something in between? With the 24V iP20 3014 CCT Adjustable LED Strip - 240 LED/m from LED Montreal, you can have it all in the same Strip.

Thanks to the special CCT Adjustable Remote and Controller (FUt007 and FUT035, sold separately), you can control the color temperature of your white from 2700K to 6500K in increments of approximately 300K and dim your LED Strip. Furthermore, the Multi Zone system will let you control and unlimited amount of controllers divided in up to 4 zones. Read more about our Multi Zone system here.

This cUL Listed 3014 LED Strip offers 240 LEDs per meter (120 Warm White and 120 Cool White) for a total of 1200 LEDs per 5m Strip. That is an average brightness of 1100 lumens per meter at a 120 degree lighting angle. Versatile, it can be cut at every 6 LEDs  (approx 5cm) to perfectly fit your project. The CCT Adjustable LED Strip has a CRI (color rendition Index) of >90.

This CCT Adjustable 3014 LED Strip with 240 LED per meter requires 18W of power per meter and has brightness second to none that allows you to get a continuous flow of Light (without the standard dot effect of LEDs) when you combine this CCT Adjustable LED Strip with our specially designed LED Aluminum profile. Imagine how amazed your guests will be when they see a thin light bar that looks exactly like neon.

Like all High Intensity Strips, the UL Listed 3014 Strips MUST benefit from proper heat dissipation in order to ensure proper performance and durability. Attempting to install this LED Strip on an improper surface may permanently damage the Strip and surface. In order to obtain proper heat dissipation, you must install the 3014 LED Strip in a compatible Aluminum profile.

Looking for a power supply for your 24V Strip? Visit our 24V power supply section here.This LED Strip can only be used with a Non-Dimmable power Supply and its own CCT Adjustable controller. 

Rated at iP20, this LED Strip offers no protection from water and dust which is why we recommend installing it in an aluminum profile. Furthermore, there are no solderless connectors available for The CCT Adjustable 3014 LED Strip. Given its high intensity, we recommend using 20AWG wire should you need to make connections between parts of LED Strips. If you‘re not in a position to make proper soldering, our Team will be happy to cut and solder your Strips according to your needs. A 3 to 5 business day delay is required to complete your project. Please visit our Contact us page for more details.

Specifications:

Brand: CDNLUX
Certification: cULus for Canada and USA E498952

Chip: Epistar 3014 SMD
Chip density: 240 LEDs per meter
Can be cut: All 12 LEDs (5cm)
Length: 5 meters
Width: 10mm
Height: 2mm

Voltage: 24V DC
Power consumption: 16W/m
Recommended power supply: 19.2W/m, Class 2 power supply required
Recommended power supply for 5m: 96W, Class 2 power supply required
Typical luminous flux: 1100 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: Tunable White 2700K to 6500K
CRI: 90+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: 3 wires (17cm) on one end and 3 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel

Wire Color Code
Black Wire: +
Green Wire: - (Cool White)
Red Wire: - (Warm White)

Spec Sheet (PDF)