Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

DREAM Color RGB LED Strip (Strip Only)

CODE: DREAMSTRP

$52.99

In stock

DREAM Color RGB LED Strip (Strip Only)


Looking to add onto or replace one of the Strips on your Dream Color RGB LED Strip Kit? LED Montreal now offers the DREAM Color RGB LED Strip as an individual item.

Featuring 150 or 300 individual 5050 RGB Chips, the RGB LED Dream Color Strip allows you to make amazing chasing patterns AND solid colors as well. Simply put, it’s probably our most versatile RGB Strip.

This addressable RGB LED Strip is only to be used with the Dream Color Controller. Do not use this Strip with any other RGB controller.

Adding onto existing Dream Kit
If you wish to add on to your current Dream Color RGB LED Strip Kit, you'll have to setup your controller to adapt to your strip length and ensure that you have sufficient power to do so (we recommend using 28W of power per 5m length or 56w for the 60 LED/m). You can set up your controller by pressing the on-off button to turn the strip off. Then by pressing (+) or (-) Length, you will be able to switch over to the length mode. It now shows the amount of sections of 3 LEDs operated by the controller. For 5 meters it should be at P050 (or P0100 for the 60 LED/m), 10m is p100 (or P0200 for the 60 LED/m), 15m is P150 (or P0300 for the 60 LED/m) and 20m is P200 (or P0400 for the 60 LED/m). Make sure it's assigned properly in order to control your whole setup.


Note that the Dream Color strip is 12mm wide (not counting the silicon tube) and is not compatible with RGB connectors. This is a complex product; we don't recommend attempting to modify it.

The iP67 Dream Color strips are not self adhesive, to maintain them in place we suggest using GE pure silicone I (do not use silicone II) and double-sided adhesive tape. Simply put the silicone on the back of the strip, and then put the double-sided tape on top of the silicone. Once the silicone is dry, your strip is ready to install!

DREAM Color RGB LED Strip Specs:
Waterproof (iP67, silicon tube)
Interior usage only
5 meter LED strip, 30 LEDs per meter, 150 LEDs in total
LED type: 5050 SMD

DREAM Color RGB LED Strip Specs:
Waterproof (iP67, silicon tube)
Interior usage only
5 meter LED strip, 60 LEDs per meter, 300 LEDs in total
LED type: 5050 SMD

Caution: We do not recommend cutting the Dream Color Strip

 

No FAQ found, submit a question!

Related Products

Loading...