Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

Wall Mounted RF Multi Zone Panel and-or Controller for RGB LED Strips

CODE: WMRGBCTRL

$49.24

In stock

Wall Mounted RF Multi Zone Panel and-or Controller for RGB LED Strips

It has finally arrived! LED Montreal keeps innovating and has just launched the Wall Mounted RF Multi Zone Panel Remote Control for RGB LED Strips to use with the Multi Zone Controller.

The Wall Mounted RF Multi Zone Panel Remote Control for RGB LED Strips has fashionable tempered glass, and its touch screen is very stable and has a high speed wireless transmitting rate. The newest addition to the Multi Zone system is more than elegant with its newly developed technology and stylish look. It is wireless and needs no wiring. You can either install it on a wall or surface of your choice with use of the included double sided adhesive tape, or with use of screws, or simply use it as a mobile remote control.

The Wall Mounted RF Multi Zone Panel Remote Control for RGB LED Strips operates on 2.4 GHz frequency, giving it with a range of up to 30 meters and features numerous functions for each zone you want to control.  Control all Zones at once or each Zone individually. Get white with your RGB Strip at the touch of a button. Change dynamic Modes for effect. Use the Color Slider to choose the color you want, and the Dimming Slider to change the brightness.

With the Wall Mounted RF Multi Zone Panel Remote Control for RGB LED Strips from LED Montreal, you can operate every single RF LED Strip in your house. You already have a setup at home but it’s not quite as versatile as you’d like? Expand it to a RF Multi Zone system and make it as awesome as it can be. All you have to do is change the controllers for your LED strips and you can now control them all with the Multi Zone Wall Mounted Remote. On the flipside, If you’re a newbie to all of this, you can start shaping your dream house with a RF Multi Zone RGB+W LED Strips kit which includes the remote, controller and as many strips as you need. Add as many controllers as you want and assign them all to one of the 4 available zones.

You can control the following items with your multi zone remote and controller: 150 LED RGB 5m Strips and 300 LED RGB 5m Strips. Those 2 items can be synced and controlled together, within the same zone. So if you set both a 20 meter bundle of RGB 150 and one of RGB 300 on Zone 1, for example and then choose the color red on the remote, all your strips will turn to red.

This controller is compatible with both 12V and 24V equipment.

The 4 Zone set up is the coolest thing ever!

A few examples:
•  Control the lighting in your kitchen on Zone 1, your bedroom on Zone 2, your living room on Zone 3 and your recreation room on Zone 4.
•  Divide a room in two zones and control a side of the room with Zone 1 and the other side of the same room using Zone 2.
•  Alternatively, you could set up the whole house on a single zone and have all your strips change color in sync.
•  You could also cut a LED strip in 2, plug in a different controller for each part and control the 2 pieces separately on 2 different zones. Note that if you do so, you’ll need an extra wire with connector and power supply.

Adding on to a Zone is easy!
For a new product or a product that has never been linked before:

  1. Disconnect the power supply from the controller to switch off  the light(s) you want to program.
  2. Turn the light back on and within 3 seconds; press the ON (│) button of the zone you want to assign (1 to 4) on the remote control.
  3. The light will slowly flash 3 times to indicate that it was successfully linked.

You can repeat this procedure for each light product you want to add to your Zone.

Change a light from one zone to another.
If the light you want to add to a zone was previously assigned to a different one, you will first need to unlink that light.

  1. Identify which zone the light is currently assigned to.
  2. Disconnect the power supply to turn off the light(s) you want to program.
  3. Power the light back on and within 3 seconds; press the ON button of the previously assigned zone 5 times quickly.

You can then proceed and program your light according to the add-on procedure outlined above.

Wall Mounted Remote Specifications:
- L86mm x W86mm x H20mm
- Control distance: 30m
- Input Voltage 3V (requires 2 AAA batteries)
- Working temperature: -20-60°C
- Color: White casing
- Mount type: Screw in or double sided adhesive tape (included)

For extensive instructions on how to install your Multi-Zone setup, VISIT THIS PAGE.


*** Unsure if this RGB controller and remote will best suit your needs? Visit our RGB Controllers and Remotes Buyer's Guide to compare specifications from all of LED Montreal’s vast selection of RGB Controllers and remotes and make an informed decision.

 

As always, our team of experts is available should you have any question or require assistance putting your project together.

No FAQ found, submit a question!

Loading...