Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

RGB 3528 LED Strip Kit (300 LED)

CODE: RGB3528KIT

$34.05

In stock

RGB 3528 LED Strip Kit (300 LED)

The 5M RGB 3528 LED strip kit from LED Montreal is great for the LED enthusiast looking for an economical way to get a multi color lighting. The 5M RGB 3528 LED Strip is only 8mm wide and features 300 individual 3528 LED chips: 100 Red, 100 Green and 100 Blue LEDs. All three colors can be displayed separately, all at once or alternatively with one of the 4 preprogrammed flashing and chasing modes.

The 5M RGB 3528 LED strip kit comes with a 12V 2A power supply and its own wired controller and can be put together in seconds. Note that for an extra 5$, you can upgrade to a wireless IR 24 key remote and controller package. The splash proof iP65 rated silicone coating of the 3528 LED Strip includes a 3M self adhesive back for quick installation.

The 3528 LED chip is a single color chip, it does not allow you to mix the Red, Green and Blue in order to obtain different colors, such as white or yellow. Should you wish to obtain more than 3 colors from your LED Strip, make sure that you use a Strip with 5050 LED chips. As well, please note that there are no connectors and extension available for 5M RGB 3528 LED strip kit. Therefore, this kit is not recommended for usage under kitchen cabinets or for any other application that would require that connectors and extension in order to bypass an obstacle. Once again, we recommend using one of our 5050 RGB LED Strip kits for such projects as we offer an extended selection of connectors and accessories for these.

Use of Adhesive Tape
If you're planning on installing your LED strip sideways or upside down, we strongly suggest using extra adhesive such as the Double Sided 3M 9495LE Tape for LED Strips
       
For porous surfaces, outdoor usage, wet and marine environments or usage with IP 68 strips, we suggest using the Double Sided 3M Acrylic Tape for LED Strips
   
WARNING: Do not use the Double Sided 3M Acrylic Tape on 3014 LED Strips or for more than 4 consecutive hours at full intensity (or commercially used) 5050 Led Strips, as there could be a risk of damage to the LED strip.

No FAQ found, submit a question!

Related Products

Loading...