Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

Banner client project

20 Meter Submersible iP68 RGB LED Strip with Sound Control



In stock

20 Meter Submersible iP68 RGB LED Strip with Sound Control

Unlike ip65 strips that are waterproof on 3 sides, ip68 strips are encased in a thick clear tube filled with silicon. Our ip68 LED strips are completely water proof. It’s the ideal LED strip for outdoor usage, for the boat, the RV or even for inside an aquarium. ip68 strips are submersible in up to 10 meters of water.

This 20 meter Sound Controlled LED Strip Bundle is the longest available in the market. This super long LED strip kit will enable you to complete even the most complex LED lighting projects. From under cabinet LED lighting for large kitchens to stage lighting projects, if you're looking for a long LED strip, this is the one you need.

Note that even if you don’t need the sound option, the included sound controller is the only LED controller that will allow you to connect more than 10 meters of RGB strip to a single circuit. The sound control mode is optional, you can turn it off and use this kit as a regular non sound activated LED Strip. You can also set it on a single color or use one of the 2 non sound controlled automatic color changing modes.

Configuration for the 20 meter LED Strip bundle:
The RGB Sound Controller has 2 outputs. You can connect 2 strips (10m) on the left output and 2 strips (10m) on the right output. You can't connect 3 or 4 strips one after the other on the same output, the tension on the circuit will be too high and you will damage your strips. Note that if you require more than 20 meters of LED strip for your project, you will have to use more than one bundle to complete it.

Control your multi-color RGB LED strip through music and take your RGB LED Strip to a completely new level. The LED Controller with sound control will change the colors of the RGB LED strip in sync with the beat of the music you are listening to. You can set the level of sound sensitivity to the surrounding sounds.

Sound option 1: When there’s no sound LED lights are off, turns on and alternates color in sync with sound
Sound option 2: When there’s no sound LED lights will alternate color, color alternates in sync with sound

Note that only the LED strip is water proof, to make a 20m bundle you will have to join 2 5m strips together. the connectors at both ends of each strip, the controller and power supply are not waterproof and must not be in contact with water or moisture. 

The iP68 strips are not self adhesive, to maintain them in place we suggest using GE pure silicone and double-sided adhesive tape. Simply put the silicone on the back of the strip, then put the double-sided tape on top of the silicone. Once the silicone is dry, your strip is ready to install! Additional option when looking for a sharp and subtle way to hold your ip68 LED strips, the Silicone Mounting Brackets for LED Strips from LED Montreal are a great solution.

Dimensions: 20 meter long, 1.2cm wide and 0.5cm thick

How to properly install your Sound Controller unit.
First, please ensure that the power supply is connected correctly. The green or blue light on the power supply will turn on when it is. Make sure to open the green connecting ports by unscrewing the screws first. Make sure that the wires are properly skinned and that the metal clamps of the ports make contact with the metallic wire (not the plastic coating). On the green port on the right, the red wire has to be connected in the + port, the black one in the other port. On the other side of the controller, there’s 2 green connecting ports labeled RGB +:
Red goes in R, Green in G, Blue in B and Black in +.

Waterproof ip68
Suitable for indoor and outdoor usage (-10 to 40°C)
4 x 5 meter strip, 30 LEDs per meter, 600 LEDs in total
LED type: 5050 SMD (3 times brighter than regular 3528 LEDs)
Luminous intensity(mcd): Red/Green/Blue: 650/1000/400
Comes with a multi function 24 key remote with different flash modes and color selection
You can also set it on a single color and adjust the brightness
Full RGB mode (red, green, blue) will enable you to select 16 individual solid colors
4 light patterns

Package Includes:
4-5 meter ip68 150 LEDs 5050 Super RGB Flash SMD LED Strips.
1-LED Control Box/Receiver
1-Remote control
1-Power adaptor 12V 10A

Will these withstand Winnipeg winters? Has there been any tests installing and operating these when the temperature is around -30 Celsius?

Asked by Terrell | 05/11/2013, 13:24 | 1 answer(s)