Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

Banner client project

24V 5m to 20m IP67 3528 White Outdoor LED Strip Kit - 120 LEDs/m

CODE: 3528UL12067K

$130.00

In stock
Quantity  10+   20+   40+ 
Price per unit  $72.95   $71.95   $69.95 

24V 5m to 20m IP67 3528 White Outdoor LED Strip Kit - 120 LEDs/m

Demand the best for your outdoor installation! The 24V CDNLUX 5m IP67 3528 White Outdoor LED Strip kit is what you need for a bright weatherproof lighting. It is perfect for lighting your gazebo, awning or outdoor terrace. We do not suggest this product for pool lighting.

The 3528 Certified IP67 LED Strip features 120 LED lights per meter for a total of 600 over its total length of 5m, a brightness of 800lm per meter and a 120 degree illumination angle. Versatile, it can be cut every 6 LED lights (approx.5 cm). To best suit your existing decor, it comes in three variations of White: Warm White (3000k), Natural White (4000-4500k) and Cool White (6000k).

This outdoor LED Strip is offered in a 24V version should you need to extend your runs beyond 5 meters or if you require adding wiring while keeping a consistent light intensity. Indeed, with 24V technology you can put a maximum of 10m continuously on the same transformer without significant voltage loss.

CDNLUX LED Strips are cULus certified. This means that they have been tested for electrical safety according to Canadian standards when they are powered by a compliant Class 2 transformer. It also means that they will pass the most rigorous building inspections in Canada and the United States.

The cULus Certified 3528 LED Strip requires a power supply of 9.6W per meter (although to ensure optimal performance of your Transformer, we recommend 12W / m) and can be dimmed using a compatible dimmer. The 3528 CDNLUX Strip with 120 LED/m is an excellent alternative to the 5050 Strip, which is more energy-consuming.

You can customize your LED lighting installation as this Strip can be cut every 6 LEDs (5cm). The CDNLUX LED Tape is vertically flexible but can not be bent horizontally. If you need to get around an obstacle or turn a corner, we recommend that you remove the iP67 cover with an x-acto knife and solder the 2-connector wire to your Strip. The solder provides a solid connection and minimal voltage loss. Then cover the weld with the appropriate silicone tips, making sure to fill the silicone tip with type 1.

Your LED Tape is equipped with a high quality 3M exterior adhesive. This adhesive is designed to adhere to most exterior smooth surfaces. If you need to install your LED Strip on concrete or wood curbs, we recommend that you install it in a LUX740 exterior profile.

The cETL Certified Transformer included in this kit is also designed for outdoor use. Its sturdy aluminum housing is weather-resistant and uses ambient air to cool down. It is not advisable to put it in a waterproof box. Its high voltage (120VAC) connection is made up of 3 wires that must join your 120VAC power via a waterproof junction box. We also recommend a junction box for the 24V DC connection of your 96W Power Supply. The junction box will also allow you to protect your Controller as it is not waterproof.

The Multi Zone controller completes this high-end kit. With a range of 30m via its remote control or WiFi adapter available, it is both powerful and easy to use. We invite you to visit this page for more details on Multi Zone systems.

Configuration for 15 meters ip67 3528 LED Strip:
You have to connect 2 strips (10m) on one side and 1 strip (5m) on the other. You can't connect 3 or 4 strips one after the other on the same output, the tension on the circuit will be too high and you will damage your strips.

Configuration for 20 meters of ip67 3528 LED Strip:
20 meters is the maximum length of 3528 strip that you can connect on a single circuit. You have to connect 2 strips (10m) on the left output and 2 strips (10m) on the right output. You can't connect 3 or 4 strips one after the other on the same output, the tension on the circuit will be too high and you will damage your strips.

The CDNLUX Difference: 

There are many features that make the CDNLUX LED Strips stand out from the competition. First, the PCB (Printed Circuit Board). We use custom PCB that ensures a consistent brightness throughout the Strip. Unlike cheaper strips that can be found on the market, the CNDLUX Strip will allow you to connect to 10 meters in series without losing brightness. 

You will also be happy to know that CDNLUX uses Super Bright chips on their LED Strips. This means that you will get the best brightness for your money out of each LED Chip. As a matter of fact, CDNLUXChips are 25 to 30% brighter than chips used on lower prices LED Strips that you would find on discount websites. 

CDNLUX LED Strip are cULus Listed. This means that they have been tested for electrical safety according to Canadian Standards when powered with a compliant Class 2 Power supply. It also means that they will pass the toughest building inspections both in Canada and the USA. 

CNDLUX uses iP67 Technology on their outdoor Strips. Lower end strips are waterproofed with silicon glue that tends to crack and lose its transparency with time. Furthermore, the silicon glue is only laid on top of the strip, leaving the back of the circuit board to humidity. The CDNLUX iP67 technology protects your strip all around with a silicon sleeve that remains clear and flexible through time 

With CDNLUX, you’re never on your own. Your LED Strip comes with the tech support and troubleshooting that you need to complete your project. All our representatives are based in Canada and are fully bilingual. You can reach us by email or by phone during business hours. Definitely not something you would get from an overseas seller on a discount website.

Specification:

Brand: CDNLUX
Model: MTL-FP8AEIM-120AxW
Certification: cULus E498952
Available voltage: 24VDC
Chip: Epistar 3528 120LED / m
Lighting angle: 120 degrees
Typical lighting power: 800 lm / m
Can be cut: All 6 LEDs (5 cm)
Strip Width: iP67: 11mm
Self adhesive, 3M exterior sticker
Power consumption: 9.6W / meter
Recommended transformer: 12W / meter
Operating temperature: 40C to -20C
Suitable for a dry, wet and wet environment
Dimmable: Yes, via a dimmable transformer or remote control.
Heat Dissipation: Not necessary

With CDNLUX, you are never alone. Your LED Strip comes with the technical support and troubleshooting you need to complete your project. All our representatives are based in Canada and are fully bilingual. You can reach us by e-mail or by phone during opening hours. Certainly not something you would get from a foreign seller on a discounted website.

Loading...