Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm 

24V 5m iP20 2835 White Dim to Warm LED Strip - 196 LEDs/m (Strip Only)

CODE: DIMWRM

$89.95

In stock
Quantity  10+   25+ 
Price per unit  $84.95   $79.95 

24V 5m iP20 2835 White Dim to Warm LED Strip - 196 LEDs/m (Strip Only)

You want to use LED Strips to enhance your decor but would like to find the warm brightness of incandescent light when it is used at low intensity? That's exactly what the iP20 24V LED Strip 2835 Single Color Dim to Warm 196 LEDs/m from LED Montreal offers.

With two integrated LED chip types and state-of-the-art dimming technology, this LED Strip produces 3000K or 4000-4500K light (depending on the Ribbon chosen) when used at full power and offers ultra-warm lighting 2200K when you decrease the intensity. In short, you will enjoy the benefits of LED technology while getting the effect of a traditional light when you decrease the intensity.

The iP20 24V LED Strip 2835 Single Color Dim to Warm offers a brightness of 1530 lumens per meter at 4000-4500K and consumes 17W per meter. It can be cut every 2.8 inches (71mm) and offers 120 degree illumination. It is the ideal companion for our CONTBAR bar with which you will obtain a continuous light effect (without dots), which is ideal for lighting under cabinetry when countertops are granite or Quartz. It should be noted that this tape must be installed on a surface that will dissipate heat.

This high-end CDNLUX brand strip is cULus certified when powered by a Class 2 transformer and is 5 meters long and 12mm wide. With a height of 2mm, it is equipped with a 3m sticker for non-porous surfaces. The life expectancy is 50,000 hours.

The iP20 24V LED Strip 2835 Single Color Dim to Warm can be paired with one of our dimmable power supply or with our Multi Zone dimmer kit.


The CDNLUX Difference:

There are many features that make the CDNLUX LED Strips stand out from the competition. First, the PCB (Printed Circuit Board). We use custom 3OZ PCB that ensures a consistent brightness throughout the 12V Strip. Unlike cheaper strips that can be found on the market, the CNDLUX Strip will allow you to connect to 10 meters in series without losing brightness.

You will also be happy to know that CDNLUX uses Authentic Epistar chips on their LED Strips. This means that you will get the best brightness for your money out of each LED Chip. As a matter of fact, Epistar Chips are 25 to 30% brighter than chips used on lower prices LED Strips that you would find on discount websites.

CDNLUX LED Strip are cULus Listed. This means that they have been tested for electrical safety according to Canadian Standards when powered with a compliant Class 2 Power supply. It also means that they will pass the toughest building inspections both in Canada and the USA.

CNDLUX uses iP65+ Technology on their Strips. Lower end strips are waterproofed with silicon glue that tends to crack and lose its transparency with time. Furthermore, the silicon glue is only laid on top of the strip, leaving the back of the circuit board to humidity. The CDNLUX iP65+ Technology protects your strip all around with a silicon sleeve that remains clear and flexible through time. The iP65+ coating is so efficient that a Strip equipped with this technology could be used outdoors, inside an aluminum channel in most provinces. If you are experiencing typical Canadian winters, we suggest using our iP67 Strip for outdoor applications.

With CDNLUX, you’re never on your own. Your LED Strip comes with the tech support and troubleshooting that you need to complete your project. All our representatives are based in Canada and are fully bilingual. You can reach us by email or by phone during business hours. Definitely not something you would get from an overseas seller on a discount website.

Specifications:

Brand: CDNLUX
Model: MTL-FP12ACIDJ-196AWWPCW
Certification: cULus E498952
Voltage available: 24VDC
Chip: Epistar 2835 SMD
5M roll, 196LED/m. 980 LED total
Lighting angle: 120 degrees
Can be cut: All 6 LEDs (7.1cm)
Strip Width: iP20: 12mm
Self-adhesive
Power consumption: 17W / meter
Recommended transformer: 19W/ meter, must be powered by a Class 2 transformer
Operation temperature: 40C to -10C
Suitable for dry environment
Dimmable: Yes, through the remote/ wall panel
Heat Dissipation: Necessary

 

No FAQ found, submit a question!

Loading...