24V Amber 1800k 5 Meter 3528 120 LED per Meter ip20 (LED Strip Only)

24V Amber 1800k 5 Meter 3528 120 LED per Meter ip20 (LED Strip Only)

Create the warmest of ambiance with the 1800k 3528 LED Strip from LED Montreal. This 24V LED Strip is recommended for bars and lounge looking to offer a soothing, antique ambiance to their clientele at an affordable price. Offered in a 5m roll, it features a self adhesive backing and can be cut at every 6 LEDs (10 cm). The 24V circuit of the Amber 3528 LED Strip allows you to install 2 Strips in series (back to back) and still achieve a bright, consistent lighting. 

Speaking of brightness, this 120 LEDs per meter Amber LED Strip will give you an output of 400 lumens per meter. And don’t worry if you feel that this may be a bit bright for your application as the Amber LED Strip is fully dimmable through one of our DC dimmers and remotes or AC dimmable LED Drivers. 

Please note that we recommend using at least 12W (at 24V) per meter to properly power this Amber LED Strip and to install it on an aluminum surface (or inside an aluminum profile) if you intend on using the 1800k 3528 LED Strip for extended periods of time at full brightness. Consult our page about power supplies to know more about the required power for your LED strip.

Specifications:

Brand: CDNLUX
Certification: cULus for Canada and USA E498952

Chip: Epistar 3528 SMD
Chip density: 120 LEDs per meter
Can be cut: All 6 LEDs (50mm)
Length: 5 meters
Width: 8mm
Height: 2mm

Voltage: 24V DC
Power consumption: 9.6W/m
Recommended power supply: 12W/m, Class 2 power supply required
Recommended power supply for 5m: 60W, Class 2 power supply required
Typical luminous flux: 400 Lumens/m
Available colors: 1800K
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: Female DC plug (17cm) on one end and 2 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Not necessary but recommended to be installed on a heat dissipating surface or in appropriate aluminum channel

Spec Sheet (PDF)