Order By Phone
1-855-533-4685  -  Mon-Fri 10:30am to 5:00pm

24V 5m iP20 3528 White LED Strip - 180 LEDs/m (Strip Only)

CODE: 3528180

$74.95

In stock

24V 5m iP20 3528 White LED Strip - 180 LEDs/m (Strip Only)

LED Montreal offers a complete range of CDNLUX Certified Low Voltage LED Strips intended for industry professionals such as designers, architects, and cabinetmakers. Our Certified 24V LED Strips will perfectly answer your clientele’s certification needs, even if their project is in the USA.

This 3528 LED Strip offers 180 LEDs per meter over a 5m Strip for a total of 900 LEDs per Strip, a brightness of 1050 lumens per meter and a 120-degree lighting angle. It offers a High Color Rendition Index (CRI) of 95+.  Versatile, it can be cut at every 6 LED (approx 3.5cm) to perfectly fit your project. To better suite your existing decor, we have made the Certified 3528 Strip available in various shades of white, see the pull-down menu for availabilities.

The 3528 LED Strip with 180 LED per meter requires 14.4W of power per meter (we recommend using 18W to ensure a proper load on your LED driver) and can be dimmed with one of our compatible dimmers or Dimmable LED Drivers. The Certified 3528 LED Strip emits a continuous flow of Light (without the standard dot effect of LEDs) when you combine it with our specially designed LED Aluminum profile. We recommend using our LUX740 profile with the Premium Diffuser to get a bright, crisp and dot less lighting. This strip is ideal for under counter lighting as it produces a good luminous flux without being overly bright.

It is highly suggested to use this LED Strip with a proper heat sink. Most used heat sink are aluminum profiles as they also protect your uncoated strip from dust while ensuring that your LED Strip perform at its best for the longest time.

Looking for a power supply for your 24V Strip? Visit our 24V power supply section here. Keep in mind that your Strip will require 18W per meter and that you must use a Class 2 driver (power supply).

Rated at iP20, this LED Strip offers no protection from water and dust. Furthermore, there are no solderless connectors available for the Certified 3528 LED Strip. Given its high intensity, we recommend using 20 AWG wire should you need to make connections between parts of LED Strips. If you're not in a position to make proper soldering, our Team will be happy to cut and solder your Strips according to your needs, starting at 9.95$ per section. A 3 to 5 business day delay is required to complete your project. Contact us for more details.

iP20 LED Strip with 3M adhesive
For indoor use only with proper heat dissipation
Certification: cULus for Canada and USA E498952
5M roll, 180LED/m. 900 LED total
Strip width: 8mm
Can be cut every 6 LED (3.5cm)
Required Power: 14.4W/m at 24V.
Recommended power supply: 18W/m at 24V
Luminus flux: 1000 lm/m
CRI: 95+
Light angle: 120 degrees

PDF IconSpec Sheet(pdf)

No FAQ found, submit a question!

Loading...