COVID-19 update: Store open
      Order By Phone
1-855-533-4685  -  Mon-Fri 10:30am to 5:00pm

Banner client project

20 meter Sound control RGB LED Strip Kit



In stock

20 meter Sound control RGB LED Strip Kit

This 20 meter Sound Controlled LED Strip Bundle is the longest available in the market. This super long LED strip kit will enable you to realize even the most complex LED lighting projects. From under cabinet LED lighting for large kitchens to stage lighting projects, if you're looking for a long LED strip, this is the one you need.

Note that even if you don’t need the sound option, the included sound controller will allow you to connect more than 10 meters of RGB strip to a single circuit. The sound control mode is optional, you can turn it off and use this kit as a regular non sound activated LED Strip. You can also set it on a single color or use one of the 2 non sound controlled automatic color changing modes.


Configuration for the 20 meter RGB LED Strip bundle:

The RGB Sound Controller has 2 outputs. You can connect 2 strips (10m) on the left output and 2 strips (10m) on the right output. You can't connect 3 or 4 strips one after the other on the same output, the tension on the circuit will be too high and you will damage your strips. Note that if you require more than 20 meters of LED strip for your project, you will have to use more than one bundle to complete it.

Control your multi-color RGB LED strip through music and take your RGB LED Strip to a completely new level. The LED Controller with sound control will change the colors of the RGB LED strip in sync with the beat of the music you are listening to. You can set the level of sound sensitivity to the surrounding sounds.

Sound option1: When there’s no sound LED lights are off, turns on and alternates color in sync with sound
Sound option 2: When there’s no sound LED lights will alternate color, color alternates in sync with sound

How to properly install your Sound Controller unit.
First, please ensure that the power supply is connected correctly. The green or blue light on the power supply will turn on when it is. Make sure to open the green connecting ports by unscrewing the screws first. Make sure that the wires are properly skinned and that the metal clamps of the ports make contact with the metallic wire (not the plastic coating). On the green port on the right, the red wire has to be connected in the + port, the black one in the other port. On the other side of the controller, there’s 2 green connecting ports labeled RGB +:
Red goes in R, Green in G, Blue in B and Black in +.

Click here for detailed instructions on how to install your Music Controller and make it work properly.

Specifications for the RGB LED Strip:

Spill proof* (IP65, Silicon injection) with 3M Adhesive Tape on the back of the LED Strip
4 x 5 meter strip, 30 LEDs per meter, 600 LEDs in total
LED type: 5050 SMD (3 times brighter than regular 3528 LEDs)
Luminous intensity(mcd): Red/Green/Blue: 650/1000/400
Comes with a multi function 24 key remote with different flash modes and color selection
You can also set it on a single color and adjust the brightness
Full RGB mode (red, green, blue) will enable you to select 16 individual solid colors
light pattern: Flash / Fade / sound 1 / sound 2
16 Speeds Control in Flash / Fade

*Please note that this product is spill proof but not water proof, make sure not to expose it to running water. 

The RGB LED Strip kit Includes:

4 - 5 meter 150 LED Strip: 5050 RGB LED
1- LED Sound Control Box/Receiver
1- 24 key sound remote control
1- 12V 10A Power adapter
Power and RGB LED Strip connectors

Use of Adhesive Tape
If you're planning on installing your LED strip sideways or upside down, we strongly suggest using extra adhesive such as the Double Sided 3M 9495LE Tape for LED Strips
For porous surfaces, outdoor usage, wet and marine environments or usage with IP 68 strips, we suggest using the Double Sided 3M Acrylic Tape for LED Strips
WARNING: Do not use the Double Sided 3M Acrylic Tape on 3014 LED Strips or for more than 4 consecutive hours at full intensity (or commercially used) 5050 Led Strips, as there could be a risk of damage to the LED strip.


5 meter Sound Control RGB LED Strip Kit

I am trying to put lighting under trim of house approximately 250 feet multi Color any recommendations was looking at purchasing 3 20 meter rob led strip kits is this possible thank you

Asked by Allan | 01/29/2018, 01:43 | 1 answer(s)

Can these be "cut to length" as required to turn a corner and use the 90 degree connector to make the turn?

Asked by Hank | 09/02/2015, 22:35 | 1 answer(s)

I'm looking at about 100 feet.
Can the bundles work together in unison ? As in color changing .

Asked by dean | 01/29/2015, 22:09 | 1 answer(s)

Thinking of getting 20m sound kit RGB. Can this lighting be used for a boat deck?

Asked by David Bryenton | 05/08/2014, 12:24 | 1 answer(s)