Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm
COVID-19 update: Store open  see details.

Banner client project

IP68 Red, Green or Blue LED Strip Kit with Outdoor Driver



In stock

IP68 Red, Green or Blue LED Strip Kit with Outdoor Driver

Here's what your need to build your ultimate outdoor LED strip setup! Using the appropriate Outdoor driver, you can hardwire your strip kit to your 120V power source and install it all outside. The included output wire is 14 gauge, allowing you to use a longer extention between your driver and your controller / LED Strip (up to 15 meters with 14 gauge wire). With its robust cover and waterproof connections and cables, it is your best option to power any iP68 LED Strip kit that you want to place on your patio, poolside, gazebo, rv, trailer, boat, cottage or anything outside! 

The basic kit comes with no controller, only the power supply and LED Strip. Using the drop down menu, you can easily upgrade your kit to use the 11 Key RF Controller or the Single Color Multi Zone Controller and Remote. To sufficiently protect your controller, we suggest using a Weatherproof Project Box.

The drop down menus also allow you to pick your prefered length and type of LED strip to perfectly match your needs! The LED Strip kits in comes in Red, Green or Blue or Warm White (3200K)Natural White (4500k)Cool White (6000K).

Please note that you if you choose a 5050 5m kit, you will receive a 60W Class 2 Hanley iP68 LED Driver. If you select a 10m 5050 kit, you will get a 132W Mean Well iP65 132W LED Driver.

About our Outdoor driver: This power supply is rated iP65 or better, which means it is waterproof and safe to put outside. Keep in mind that the connections are not waterproof and need to be protected. The 12V power supplies provide constant 12V current and feature two distinct ports for input and output: the 120V AC input has 3 wire connections: one for the live wire, one for the neutral wire and one for the ground. The 12V DC output features 2 connections: one positive and one negative, provided with 14 gauge wire. We will provide you with the appropriate 12V power supply to provide enough power for the kit you chose.

Compliant with worldwide safety regulations for lighting, the Outdoor hard wired power supply has been the electrician’s choice for several years! 

This single output power supply has integrated protection from short circuits, over current and over voltage as well as over temperature. All circuitry of Outdoor power supply is concealed inside a fully isolated plastic case that is cooled by free air convection. 

Important Note: Outdoor power supplies are not compatible with AC dimmers. To dim your LEDs with these power supplies, you will have to use one of the 12V DC dimmers listed above.

About the iP68 Strips: Note that only the LED strip is water proof, the connectors at both ends of the strip are not waterproof and must not be in contact with water or moisture. You can use extra silicon and heat shrink tube to make your setup safer. 

The iP68 strips are not self adhesive, to maintain them in place we suggest using GE pure silicone and double-sided adhesive tape. Simply put the silicone on the back of the strip, then put the double-sided tape on top of the silicone. Once the silicone is dry, your strip is ready to install! Additional option when looking for a sharp and subtle way to hold your ip68 LED strips, the Silicone Mounting Brackets for LED Strips from LED Montreal are a great solution.

If you are looking to install ip68 submersible LED strips to your awning, pool, deck, RV, boat, docks, or anything of that nature, we invite you to read our page on how to install your under awning LED strips.

For every 10m 5050 kit, your package will include a Y shape splitter, which you need in order to split your circuit as evenly as possible. On longer circuits like these, the light might tend to get dim on the ends if power isn't distributed evenly.

IMPORTANT NOTE: Since the Outdoor Driver has to be hardwired into the wall dimmer using 110-120V power, it requires to be installed by a qualified professional.

PDF IconH60WPPS_SpecSheet.pdf   PDF IconMeanWell-Power-Supply-132w-CLG-150-SPEC (pdf) 

The 5050 Strips MUST benefit from proper heat dissipation in order to ensure proper performance and durability. Attempting to install this LED Strip on an improper surface, such as wood or dry wall, will permanently damage the Strip. In order to obtain proper heat dissipation, you must install the 5050 LED Strip in an Aluminum profile or metallic surface.

No FAQ found, submit a question!