12V 5m iP20 Bendable 2835 White LED Strip - 60 LEDs/m (Strip Only)

12V 5m iP20 Bendable 2835 White LED Strip - 60 LEDs/m (Strip Only)

Always wanted to backlight letters or oddly shaped objects but regular LED Strips would not do the trick? Well, your search is over with the new 2835 Bendable Strip from LED Montreal. Thanks to its unique M shape PCB, this 12V LED Strip can be bent to just about any shape. Offered in 5 m length, the Strip can be cut at every 3 LED (5cm) to perfectly fit your project. The Bendable LED Strip is available in 3 shades of white: Warm White (3000K), Natural White (4000K) and Cool White (6000K). The Bendable LED Strip can also be purchased in Multicolor (RGB). To ensure high flexibility, this LED Strip does not come with a silicone coating and should only be used indoors. Should you need to connect multiple parts of strips together, we recommend soldering multi braid wire on the exposed copper connections. There are no quick connectors available for this product.

Note that to operate this LED strip you will need a 12V 5A power supply. Consult our page about power supplies to know more about the required power for your LED strip.You should not connect 2 strips in series and the maximum amount of wire used for a single circuit has to be under 4m total. Using a Dimmer is optional.

Specifications:

Brand: CDNLUX
Certification: cULus for Canada and USA E498952

Chip: Epistar 2835 SMD
Chip density: 60 LEDs per meter
Can be cut: All 3 LEDs (50mm)
Length: 5 meters
Width: 6mm
Height: 2mm

Voltage: 12V DC
Power consumption: 9W/m
Recommended power supply: 11W/m, Class 2 power supply required
Recommended power supply for 5m: 55W, Class 2 power supply required
Typical luminous flux: 800 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 3000K / 4000K / 6000K
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: Female DC plug (17cm) on one end and 2 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel
Applications: Mainly used for indoor signage or backlighting logos and letters thanks to its unique M shape PCB.

Heat sink:
We do not recommend sticking this product to wood surfaces. We suggest using a proper metallic surface to ensure proper heat dissipation. Improper heat dissipation may result in shorter lifespan, discoloration and/or great loss of brightness of your LED Strip.