1 Zone RF Remote CCT Adjustable White (C3)

1 Zone RF Remote CCT Adjustable White (C3)

You can now remotely adjust the color temperature and dim your CCT Adjustable white LED set up with an esthetical wireless remote without having to install a dimmable power supply or worry about wall or furniture interfering with the remote signal.

Your remote uses 2.4GHz radio frequencies to achieve an amazing 30m of range through walls and floors. This means that you can hide your controller in your TV stand and still be able to control your LED Strips or your Low Voltage LED Pucks.
 
Although this remote is a 1 Zone product, it allows you to pair an infinite amount of controllers to your Zone. You could use several power supplies and controllers for your under-cabinet lighting and they would all be controlled by the same remote, as if everything was one big set up !

Looking to control several set ups from a single wall panel? Have a look at the C1 remote from LED Montreal.

There are 2 main control components to your remote:

1. Brightness Dimming: This feature is used to adjust the intensity of your LED Strip. 
2. Color temperature: Gives you the possibility of selecting any type of white from Warm White to Cool White. 

Matching a controller to your remote is easy!

For a new product or a product that has never been linked before: 

1. Disconnect the power supply from the controller to switch off the light(s) you want to program. 
2. Turn the light back on and within 3 seconds; press three times on the ON button on the remote control. 
3. The light will slowly flash 3 times to indicate that it was successfully linked. 

You can repeat this procedure for each controller that you want to add to your Zone.

Unlink a controller from your Remote:

1. Disconnect the power supply to turn off the light(s) you want to deprogram. 
2. Power the light back on and within 3 seconds; press the ON button 5 times quickly. 

Specifications:

Model: C3
Voltage: 3V (2 x AAA batteries)  
Transmission Frequency : 2.4GH
Control Distance: 30m
Dimensions: 140mm x 37.5mm x 15mm

Compatible Controllers (Sold Separately)

Mini Single Color Controller: MLR1, MLR2
Single Color and CCT Control (Adjustable White): E2-RF
WIFI + Single Color and CCT Control (Adjustable White): E2-WR
WIFI all in one Controller: WL5
Matter + Homekit all in one Controller: ML5
Zigbee + WIFI all in one Controller: PZ5

Discountinued Controllers:
Single Color: FUT036
CCT Control (Adjustable White): FUT035, FUT035 (Original)

All these controllers will work with 12V-24V LED Strips