24V iP20 RGB LED Strip Kit 5 to 10m - 30 LEDs/m
24V iP20 RGB LED Strip Kit 5 to 10m - 30 LEDs/m
The base kit includes a 5m or 10m cULus listed RGB Strip (30 LEDs per meter), a 24V Power Supply, an RGB E3-RF Multi Zone Controller and a FUT096 remote. You have the option to choose a different remote in the dropdown menu.
Bring your RGB LED game to the next level with this RGB Strip kit at 30 LED/m from LED Montreal. Ideal for usage in your kitchen or bedroom, it’s also everyone’s favorite to light up your home bar space.
Regarding the strip: RGB Stands for Red-Green-Blue. 5050 RGB Chips give a 120-degree light beam and feature each of these 3 colors of LED lights within each chip: This allows to create a variety of different colors by mixing the red, green and blue at different levels. The RF remote will allow you to create 250 colors. Note that the RGB Chip does not create a true white. Should you want to use your Strip to both enhance your décor and get an ambient white light, we strongly suggest using our RGB+W Strip that includes a white LED diode within the 5050 chips.
RGB LED Strips have a 4-wire connection, meaning that they can only be operated through an RGB controller. The controller will allow you to dim your strip and change colors manually or through automated color change patterns. The strip cannot be dimmed through a standard wall dimmer
You can customize your LED Lighting set up as this Strip can be cut every 5 LEDS. The RGB LED Strip is flexible vertically but cannot be bent horizontally. Should you need to bypass an obstacle or turn a corner, we recommend that you solder 4 strand wire onto your Strip. Soldering ensures a solid connection and minimal voltage loss.
Your RGB LED Strip is equipped with a high-quality 3M adhesive. This adhesive is intended for installation on a clean, non-glossy metallic surface. LED Strips were not designed to be installed on varnished or glossy wood surfaces.
The strip is rated IP20, making it suitable for indoor use in dry environments. It is not coated with silicone, ensuring optimal heat dissipation and a clean visual finish.
The Multi Zone RGB+White kit can be matched on the same remote as other Multi Zone kits. Simply add it to your set up as you would with any other Multi Zone item: set it on its own zone and you are ready to go. As always, make sure that it’s connected to its own power supply and controller, as the controller has a 4 wire output and the power supply has a 24V output.
To set up the output mode on the E3-RF:
Press the "SET" button continuously to switch the output mode to RGB (Red Light). The controller will log out if there's no operation within 3 seconds. Output modes are indicated by the color of the indicator light.
Red Light: RGB Strip
Green Light: RGB+W Strip (Not compatible with the strip included in this kit.)
Blue Light: RGB+CCT Strip (Not compatible with the strip included in this kit.)
Linking Code Instructions:
1. Connect your LED strip and transformer to the controller. Make sure the Strip turns on, then briefly press the SET button on the controller.
2. Briefly press the " | " button on the remote control 3 times within 3 seconds.
3. The lights will flash slowly 3 times to indicate a successful connection.
4. If the connection fails, repeat the steps.
Unlinking Code Instructions:
1. Turn off for 10 seconds by unplugging the transformer, then plug it back in.
2. Briefly press the " | " button on the remote control 5 times within 3 seconds.
3. The lights will flash rapidly 10 times to indicate a successful disconnection.
4. If the disconnection fails, repeat the steps.
Attention:
Turn off the power supply before installation.
Ensure the input voltage matches the device requirements.
Avoid using the device in areas with large metal surfaces or strong electromagnetic waves, as this may affect the remote distance.
LED Strip Specifications:
Brand: CDNLUX
Model: MTL-FP10AGIDJ-30ARGB
Certification: cULus for Canada and USA
Chip: Epistar 5050 RGB SMD
Chip density: 30 LEDs per meter
Can be cut: All 6 LEDs (165.5mm)
Length: 5 meters
Width: 10mm
Height: 2mm
Voltage: 24V DC
Power consumption: 7.2W/m
Recommended power supply: 9W/m, Class 2 power supply required
Recommended power supply for 5m: 48W, Class 2 power supply required
Available colors: RGB (Red, Green, Blue)
Lighting angle: 120°
Lifespan: 50 000 Hours
Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only, not suitable for damp and wet environment
Operating temperature: 40C to -10C
Connections included: 4 pin male connector (17cm) on one end and 4 pin female connector (17cm) on the other end
Dimmable: Yes, with a low voltage controller/remote combo
Heat dissipation: Not necessary, unless used in a commercial environment
RGBW-24V-5050-LED-Strip-EN-CDNLUX.pdf
E3-RF Controller Specification:
Model No.: E3-RF
Input Voltage: DC12~24V
Output: 6A/Channel
Total Output: Max 12A (4A at 24V or 5A at 12V to comply with Class 2 requirements)
RF: 2.4GHz
Control Distance: 30m
iP Rating: iP20
Working Temperature: -10~40°C
Output Connection: Common anode
Dimensions:100.6mm x 40mm x 17.6mm
FUT096 Remote Specification:
Model: FUT096
Voltage: 3V (2 x AAA batteries)
Transmission Frequency : 2.4GH
Control Distance: 30m
Dimensions: 120mm x 52.5mm x 21mm
