24V 5m iP20 3014 CCT White Adjustable LED Strip Kit - 240 LEDs/m
24V 5m iP20 3014 CCT White Adjustable LED Strip Kit - 240 LEDs/m
The base kit includes a 5m cULus listed 3014 CCT Strip (240 LEDs per meter), a 24V 96W Power Supply, an CCT White E2-RF Multi Zone Controller and a FUT007 remote. You have the option to choose a different remote in the dropdown menu.
Standard LED strips often provide a fixed shade of white, which can be limiting when trying to create different lighting atmospheres. Whether you need a warm, cozy tone or a crisp, cool white for task lighting, single-color strips simply cannot adapt.
The cULus Listed Adjustable White LED Strip (also called CCT) from LED Montreal solves this limitation by offering a full range of white tones, adjustable from 2700K to 6500K. This flexibility allows you to fine-tune your lighting to match any environment, time of day, or application.
This performance is made possible by advanced 3014 LED modules that integrate two white chips side by side (warm white 2700K and cool white 6500K). By blending these two color temperatures, the strip delivers smooth and precise white tuning. Each CCT LED strip features 1200 LEDs over 5 meters, or 240 LEDs per meter, ensuring strong and consistent light output across the entire length.
The Multi Zone CCT kit can be paired with other Multi Zone systems using the same remote. Integration is straightforward: assign the strip to a dedicated zone and control it independently or alongside other zones. As with all Multi Zone setups, the strip must be connected to its own compatible controller and 24V power supply.
Please note that this CCT strip operates exclusively on 24V. It is not compatible with 12V power supplies, and the included power supply should not be used with 12V products. The strip is 10mm wide, making it compatible with most standard aluminum profiles designed for single-color or CCT strips. It features 3 connection points (positive, warm white, cool white).
If you need to cut and reconnect the strip, it can be cut at designated intervals (every 12 LEDs). This being said, solder less connectors are not available for this product. Should you require to cut and reconnect your CCT Strip, we suggest soldering wires directly on your Strip for optimal reliability and performance.
Like all High Intensity Strips, the 3014 Strips MUST benefit from proper heat dissipation in order to ensure proper performance and durability. Attempting to install this LED Strip on an improper surface may permanently damage the Strip and surface. In order to obtain proper heat dissipation, you must install the 3014 LED Strip in a compatible Aluminum profile.
To set up the output mode:
Press the "SET" button continuously to switch the output mode. The controller will log out if there's no operation within 3 seconds. Output modes are indicated by the color of the indicator light.
Red Light: Single Color
Green Light: CCT Adjustable White
Linking Code Instructions:
1. Connect your LED strip and transformer to the controller. Make sure the Strip turns on, then briefly press the SET button on the controller.
2. Briefly press the " | " button on the remote control (or the SET button on the K1) 3 times within 3 seconds.
3. The lights will flash slowly 3 times to indicate a successful connection.
4. If the connection fails, repeat the steps.
Unlinking Code Instructions:
1. Turn off for 10 seconds by unplugging the transformer, then plug it back in.
2. Briefly press the " | " button on the remote control (or the SET button on the K1) 5 times within 3 seconds.
3. The lights will flash rapidly 10 times to indicate a successful disconnection.
4. If the disconnection fails, repeat the steps.
Attention:
Turn off the power supply before installation.
Ensure the input voltage matches the device requirements.
Avoid using the device in areas with large metal surfaces or strong electromagnetic waves, as this may affect the remote distance.
Specifications:
Brand: CDNLUX
Model: MTL-FP10AFIDJ-240AWWPCW
Certification: cULus for Canada and USA E498952
Chip: Epistar 3014 SMD
Chip density: 240 LEDs per meter
Can be cut: All 12 LEDs (50mm)
Length: 5 meters
Width: 10mm
Height: 2mm
Voltage: 24V DC
Power consumption: 16W/m
Recommended power supply: 19.2W/m, Class 2 power supply required
Recommended power supply for 5m: 96W, Class 2 power supply required
Typical luminous flux: 1100 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: Tunable White 2700K to 6500K
CRI: 90+
Lighting angle: 120°
Lifespan: 50 000 Hours
Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: 3 wires (17cm) on one end and 3 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel
Wire Color Code
Black Wire: +
Green Wire: - (Cool White)
Red Wire: - (Warm White)
3014 LED Strip Spec Sheet (PDF)
E2-RF Controler Specification:
Model No.: E2-RF
Input Voltage: DC12~24V
Output: 6A/Channel
Total Output: Max 12A (4A at 24V or 5A at 12V to comply with Class 2 requirements)
RF: 2.4GHz
Control Distance: 30m
iP Rating: iP20
Working Temperature: -10~40°C
Output Connection: Common anode
Dimensions:100.6mm x 40mm x 17.6mm
Controler Instruction Guide (PDF)
FUT007 Remote Specs:
Model: FUT007
Voltage: 3V (2 x AAA batteries)
Transmission Frequency : 2.4GH
Control Distance: 30m
Dimensions: 110mm x 53mm x 21.5mm
