24V iP20 3528 Single Color LED Strip Kit 5m - 60 LEDs/m
| Sort by Price | Sort by Availability | Sort by CODE | Sort by Color-Temperature |
|---|---|---|---|
$69.95
|
In stock
|
352824VK-3000
|
Color-Temperature:
|
$69.95
|
In stock
|
352824VK-2700
|
Color-Temperature:
|
|
$69.95
|
In stock
|
352824VK-3500
|
Color-Temperature:
|
|
$69.95
|
In stock
|
352824VK-4000
|
Color-Temperature:
|
|
$69.95
|
In stock
|
352824VK-6000
|
Color-Temperature:
|
|
$69.95
|
In stock
|
352824VK-5000
|
Color-Temperature:
|
24V iP20 3528 Single Color LED Strip Kit 5m - 60 LEDs/m
We offer convenient LED Strip Kits with included power supplies to meet your lighting needs. Available in length of 5m, each kit is tailored for optimal performance and easy installation.
What's Included:
LED Strip: 5m 3528 60 LED/m
Power Supply: 36W (standard plug-in non-dimmable driver).
Optional: Add a low voltage E2-RF dimmer and a remote: K1, K2, B1, K0S, FUT007 or C1
3528 LED Strip Description:
This 24V, 3528 LED Strip delivers great ambient lighting at an incredible price. Available in Warm White (2700K, 3000K, 3500K), Natural White (4500K), and Cool White (6000K), it's perfect for highlighting crown moldings and accent lighting in any room.
The LED Strip features 60 Epistar 3528 SMD LED chips per meter over a 5m roll. These chips provide a 120-degree light beam and a light output of 400 lumens per meter. Rated at IP20, this UL Listed Strip offers no protection from water and dust.Equipped with a high-quality 3M adhesive, this strip is intended for installation on clean, non-glossy metallic surfaces. It's not suitable for varnished or glossy wood surfaces.
Safety and Compliance: This 24V LED Strip is cULus Listed, ensuring electrical safety according to Canadian standards when powered with a compliant Class 2 power supply. It will pass the toughest building inspections in both Canada and the USA.
Manufactured with a custom high-quality 2 OZ PCB, this strip ensures consistent brightness throughout. Unlike cheaper strips, this LED Strip allows you to connect up to 10 meters in series without losing brightness.
Installation:
This LED strip comes with a female DC plug on one end and 2 wires (approx. 15cm) on the other end for connecting strips together or hooking up to a hard-wired power supply. The strip can be cut every 6 LEDs and is flexible vertically but cannot be bent horizontally. Soldering is recommended for solid connections when bypassing obstacles or turning corners.
Elevate your lighting projects with our 24V 5m IP20 3528 Single Color LED Strip Kits, designed for reliability, flexibility, and superior performance. Ideal for accent lighting, under-cabinet illumination, and more, these kits provide everything you need for a complete setup.
To set up the output mode on the E2RF Dimmer:
Press the "SET" button continuously to switch the output mode to single color (red light). The controller will log out if there's no operation within 3 seconds. Output modes are indicated by the color of the indicator light.
Red Light: Single Color
Green Light: CCT Adjustable White (not compatible with the 3528 single color)
Linking Code Instructions:
1. Connect your LED strip and transformer to the controller. Make sure the Strip turns on, then briefly press the SET button on the controller.
2. Briefly press the " | " button on the remote control (or the SET button on the K1) 3 times within 3 seconds.
3. The lights will flash slowly 3 times to indicate a successful connection.
4. If the connection fails, repeat the steps.
Unlinking Code Instructions:
1. Turn off for 10 seconds by unplugging the transformer, then plug it back in.
2. Briefly press the " | " button on the remote control (or the SET button on the K1) 5 times within 3 seconds.
3. The lights will flash rapidly 10 times to indicate a successful disconnection.
4. If the disconnection fails, repeat the steps.
Attention:
Turn off the power supply before installation.
Ensure the input voltage matches the device requirements.
Avoid using the device in areas with large metal surfaces or strong electromagnetic waves, as this may affect the remote distance.
E2RF Specifications:
Model No.: E2-RF
Input Voltage: DC12~24V
Output: 6A/Channel
Total Output: Max 12A (4A at 24V or 5A at 12V to comply with Class 2 requirements)
RF: 2.4GHz
Control Distance: 30m
iP Rating: iP20
Working Temperature: -10~40°C
Output Connection: Common anode
Dimensions:100.6mm x 40mm x 17.6mm
E2RF Instruction Guide (PDF)
3528 LED Strip Specifications:
Brand: CDNLUX
Model: MTL-FP8AEIDJ-60AXX --- XX denotes the type of white WW (Warm White), NW (Natural White), CW (Cool White)
Certification: cULus for Canada and USA E498952
Chip: Epistar 3528 SMD
Chip density: 60 LEDs per meter
Can be cut: All 6 LEDs (100mm)
Length: 5 meters
Width: 8mm
Height: 2mm
Voltage: 24V DC
Power consumption: 4.8W/m
Recommended power supply: 6W/m, Class 2 power supply required
Typical luminous flux: 400 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 2700K / 3000K / 3500K / 4000K / 6000K
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours
Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: Female DC plug (17cm) on one end and 2 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Not necessary, unless used in a commercial environment
