24V 5m iP20 12mm Dotless COB LED strip - RGB+W 2.0

24V 5m iP20 12mm Dotless COB LED strip - RGB+W 2.0

Get a thin linear lighting effect (12mm wide and 2mm thick) that is also elegant and bright with LED Montreal's RGB+W (Multicolor + White) COB LED Strip. UL Certified for use in Canada and the United States, this Strip offers a super high density of COB chips that will give you a continuous, neon like effect.

This professional-grade COB product has a 3 OZ copper circuit board that allows for better lighting consistency and superior heat dissipation. The COB LED Strip consumes 14.4W per meter at 24V DC. The 5m long Strip is equipped with a 150mm cable at each end.

You can cut your COB strip every 55mm and solder extension wires to it. The +24V and W connections are located on the top, while +24V, G, R, B, and W are available on the underside. It is possible to solder all wires on the underside, but soldering the +24V and W on the top, and G, R, B on the underside, provides more space and reduces the risk of the wires touching each other.

The RGBW COB LED Strip is intended for indoor use only in dry locations. To maximize the lifespan and the COB LED light, we recommend that you affix it to an aluminum surface to properly dissipate its heat. Installing this product on a wood or gypsum surface may affect its performance and lifetime of the product.  

To create an unparalleled atmosphere in the evening, you will be happy to learn that the COB LED Strip is fully dimmable through an RGBW controller and a remote C5, FUT096, FUT092, Y3 or a wall panel remote: B3, B4.

We want your project to be a success all along the line, which is why we advise you to carefully read the installation guide for Low Voltage LED Strips prior to starting your project. 

Specifications:

Brand: CDNLUX
Certification: cULus for Canada and USA

Chip: COB
Circuit board: 3 Ounces
Can be cut: Every 55mm
Length: 5 meters
Width: 12mm
Height: 2mm

Voltage: 24V DC
Power consumption: 14.4W/m
Recommended power supply: 18W/m, Class 2 power supply required
Recommended power supply for 5m: 90W, Class 2 power supply required
Typical luminous flux: 350 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: RGB + White (3000K or 4000K)
CRI on white: 90+
Lighting angle: 98.4°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: 5 wires (15cm) on one end and 5 wires (15cm) on the other end
Dimmable: Yes, with a low voltage controller/remote combo
Heat dissipation: Recommended to be installed on a heat dissipating surface or in appropriate aluminum channel