Got a question? Ask Mike!

24V 9W iP65 Multi Zone RBG + CW+WW RF LED Spot Projector

In stock
Add to wish list
Shipping time and rates:
Payment options
Our advantages

24V 9W iP65 Multi Zone RBG + CW+WW RF LED Spot Projector

The most complete indoor /outdoor LED projector is here. The 24V 9W iP65 Multi Zone RBG + CW+WW RF LED Projector from LED Montreal can produce up to 16 million colors and all shades of white from 2700 to 6500K. This LED projector features 17 individual LED Chips: 6 x 2700K Chips – 6 x 6500K Chips and 5 x RGB Chips for a perfect color blend. Installation is easy since it comes with its own installation bracket and a stake should you wish to install your RGB LED Projector in the grass.

Operating at 24VDC (power supply required ,see specifications for appropriate power supply), it has a luminous flux of 700 lumens at a 15 degree angle that has a projection range of over 10m, making it great for outdoor wall washing or to highlight you landscaping. The 24V 9W iP65 Multi Zone RBG + CW+WW RF LED Projector is fully dimmable and is controlled with a RF remote or through the Wi-Fi hub making it fully compatible with our Multi Zone Strip kits. You’ll be happy to know that you can put several Projectors on the same zone and that the auto repeating feature of the integrated controller will automatically take care of synchronizing all projectors. Furthermore, the auto transmitting function of the Projector allows it to relay the remote control signal to any synchronized RGB + White Multi Zone projector within 30m. Simply put, you only need to have one Projector within the range of your Remote Control to operate your whole system; the Projectors will take care of instantly relaying the signal to the other ones. The Multi Zone RGB + White projector is made of solid aluminum and is water and dust proof. You can operate it at temperatures going from + 50 degrees Celsius all the way down to Minus 10.

The Multi Zone system allows you to operate Multiple LED Strips or Lights, split in up to 4 Zones with a single Remote Control . Note that you can have several lights under the same Zone. All the lights that are under the same Zone will be controlled together. You can control each Zone individually or control your whole system as one big Zone, using the master button.


For example: 

• Control your projectors on Zone 1, your bedroom on Zone 2, your living room on Zone 3 and your recreation room on Zone 4.

• Divide a room in two zones and control one section with Zone 1 and another section of the same room using Zone 2.

• Alternatively, you could set up the whole house on a single zone and have all your lights change color in sync... that’s how powerful and versatile this kit is! 

Adding on to a projector to your remote is easy!


For a new product or a product that has never been linked before:

1. Switch off the light(s) you want to program through the 120V wall Switch or disconnect the 24V power supply from the 120V.

2. Turn the light back on and within 3 seconds; press 3 times on the ON (│) button of the zone you want to assign (1 to 4) on the remote control. 

3. The light will slowly flash 5 times to indicate that it was successfully linked. 

You can program several Projectors at once if they are operated on the same switch. You can repeat this procedure for each light product you want to add to your Zone. 


Change a light from one zone to another.

If the light you want to add to a zone was previously assigned to a different one, you will first need to unlink that light.

1. Identify which zone the light is currently assigned to. 

2. Switch off the light(s) you want to program through the 120V wall Switch or disconnect the 24V power supply from the 120V 

3. Power the light back on and within 3 seconds; press 5 times on the ON (│) button of the previously assigned zone for a few seconds. 

4. You can then proceed and program your light according to the add-on procedure outlined above.



Voltage available: 24VDC – Integrated RF Multi Zone Controller – The 24V wires have no polarity.
Chips: 5 X RGB , 6 X 2700K , 6 X 6500K with 15 degree lens.
Luminous Flux : 700LM
CRI: greater than 80
Lighting angle: 15 degrees
LED Lifespan: 50 000 hours
Beam range: greater than 10m
Dimensions: 136 mm wide x 135 mm high x 35mm deep
Power consumption: 9W
Recommended transformer: 1 or 2 spots: 24W – 3 or 4 projectors: 48W.
We do not suggest more than 4 Projectors per Power Supply
Operation temperature: 50C to -20C
Suitable for dry, damp and wet environment
Dimmable: Yes, through the remote/ Wi-Fi Hub 

Fields of Application: Perfect for landscaping or wall washing (indoor or outdoor)


PDF IconSpec Sheet(pdf)

Professional grade products

Canadian and American Certifications

Quantity discounts available

Create an online quote for your project