Order By Phone 1.855.533.4685 - Mon-Fri 10:30am to 5:00pm

24V iP20 2835 Single Color High Output LED Strip 640 LED

CODE: 2835RPP24V

$83.30

In stock
Quantity  5+   20+ 
Price per unit  $79.51   $75.72 

24V iP20 2835 Single Color High Output LED Strip (Strip Only)


Here is the High Intensity LED Strip that you were waiting for! The 2835 LED Strip offers 128 LED lights per meter for a total of 640 lights per  5m length. It has a brightness of 3800lm per meter and a beam angle of 120 degrees. It is versatile and can be cut at every 6 LED lights (approximately 5 cm). To fit with your existing decor,  It is offered in four shades of white: Amber (1800K), Warm White (3000k), Natural White (4500k) and Cool White (5000k).

The 2835 LED Strip with 128 LED per meter requires a power supply of 24w per meter and can be dimmed with a dimmable power supply or with a compatible low voltage dimmer. Consult our page about power supplies to know more about the required power for your LED strip.

This incredible power generates a brightness like no others which allows a continuous LED lightning with no hot spots when the strip is installed on one of our aluminium profiles specially made for this type of effect.  Imagine your guests’ reaction when they will see this thin lightning bar that has a lighting similar to a neon!
Like every high intensity strip, the 2835 LED Strip must have adequate heat dissipation to ensure its performance and durability. Trying to install this LED Strip on an improper surface will permanently damage it. You should install the 2835 LED Strip in a compatible aluminium profile.

This iP20 LED Strip does not offer any water protection. Moreover, no connectors are available for this type of strip. Because of its high intensity, you have to install 18 gauge  wire if you want to make connections on LED strips. Unable to solder your Strip ? Our team of experts will cut your Strip to the desire length  and do the required soldering  starting from $9.99 per cut . A delay of 3 to 5 open days is necessary to complete the task . Contact us for more information.

iP20 LED Strip with 3M adhesive
For indoor use only with heat dissipation
5 meter Strip, 128 LED per meter, 640 LED lights total
Length: 5m, Width: 10mm, Height: 2mm
Required Power: 24V, 24W per meter
Recommended Power: 24V, 30W per meter
LED Type: 2835 SMD 
Can be cut: Every 6 LED (Every 4.7 cm)
Luminus flux: 3800lm/m
Available colors: Amber (1800k), Warm White (3000k), Natural White (4500k), Cold White (5000k)

No FAQ found, submit a question!

Loading...