24V 5m iP65+ 3528 Single Color LED Strip - 120 LEDs/m (Strip Only)

24V 5m iP65+ 3528 Single Color LED Strip - 120 LEDs/m (Strip Only)

LED Montreal offers a range of Certified Low Voltage LED Strips intended for industry professionals such as designers, architect and cabinetmakers. Our Certified 24V LED Strips will perfectly answer your clientele’s certification needs, even if their project is located in the USA.

This 3528 LED Strip offers 120 LEDs per meter over a 5m Strip for a total of 600 LED per Strip, an brightness of 800 lumens per meter and a 120 degree lighting angle. Versatile, it can be cut at every 6 LED (approx 5cm) to perfectly fit your project. To better suite your existing decor, we have made the Certified 3528 Strip available in Red , Blue as well as 7 shades of white: Vintage White (2400K), Warm White (2700K), Warm White (3000K), Soft White (3500K), Natural White (4000K) Daylight (5000K) and Cool White (6000K).

The 3528 LED Strip with 120 LED per meter requires 9.6W of power per meter (we recommend using 12W to ensure a proper load on you LED driver) and can be dimmed with one of our compatible dimmer. The Certified 3528 LED Strip emits a continuous flow of Light (without the standard dot effect of LEDs) when you combine it with our specially designed LED Aluminum profile. Imagine how amazed your guests will be when they see a thin light bar that looks exactly like a neon. This strip is ideal for under counter lighting as it produces a good luminous flux without being too bright. In a nutshell, it's a great replacement for the standard 5050 Strip as it produces almost the same amount of light while using less energy and generating only a fraction of the heat. Looking for a brighter LED Strip? Check out the 3014 LED Strip from LED Montreal.

It is highly recommended to use this LED Strip with a proper heat sink. Most commonly used heat sink are aluminum profiles sd they ensure that your LED Strip perform at its best for the longest time. Important note:  given the high density of these LED Strips , they are not compatible with quick connectors. We recommend soldering all joints and connections.

Looking for a power supply for your 24V Strip? Visit our 24V power supply section here . Consult our page about power supplies to know more about the required power for your LED strip.

This high quality Strip features our revolutionary iP65+ waterproofing technology. The iP65+ coating protects your strip all around with a silicon sleeve that remains clear and flexible through time. iP65+ strips are ideal for indoor and light duty outdoor usage. For outdoor applications where the strip will be directly exposed to the elements, we recommend iP67+ grade strips.

Rated at iP65+, this LED Strip offers a protection from water splashes and dust. Furthermore, there are no solderless connectors available for the Certified 3014 LED Strip. Given its high intensity, we recommend using 20 AWG wire should you need to make connections between parts of LED Strips.

Specifications:

Brand: CDNLUX
Model: MTL-FP8AEIWK-120AXX--- XX denotes the type of white WW (Warm White), NW (Natural White), CW (Cool White)
Certification: cULus for Canada and USA E498952

Chip: Epistar 3528 SMD
Chip density: 120 LEDs per meter
Can be cut: All 6 LEDs (50mm)
Length: 5 meters
Width: 10mm
Height: 2mm

Voltage: 24V DC
Power consumption: 9.6W/m
Recommended power supply: 12W/m, Class 2 power supply required
Recommended power supply for 5m: 60W, Class 2 power supply required
Typical luminous flux: 800 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 2400K / 2700K / 3000K / 3500K / 4000K / 5000K / 6000K / Red / Blue
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP65+
Suitable environment: Suitable for dry, humid environment. Indoor and protected outdoor use.
Operating temperature: 40C to -10C
Connections included: Female DC plug (17cm) on one end and 2 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Not necessary but recommended to be installed on a heat dissipating surface or in appropriate aluminum channel

Spec Sheet (PDF)