12V Single Color 2835 Bendable LED Strip 300 LEDs Kit
12V Single Color 2835 Bendable LED Strip 300 LEDs Kit
Always wanted to backlight letters or oddly shaped objects but regular LED Strips would not do the trick? Well, your search is over with the new 2835 Bendable Strip from LED Montreal. Thanks to its unique M shape PCB, this 12V LED Strip can be bent to just about any shape. Offered in 5 m length, the Strip can be cut at every 3 LED (5cm) to perfectly fit your project. The Bendable LED Strip is available in 3 shades of white: Warm White (3000K), Natural White (4000K) and Cool White (6000K). The Bendable LED Strip can also be purchased in Multicolor (RGB). To ensure high flexibility, this LED Strip does not come with a silicone coating and should only be used indoors. Should you need to connect multiple parts of strips together, we recommend soldering multi braid wire on the exposed copper connections. There are no quick connectors available for this product.
Note that to operate this LED strip you will need a 12V 6A power supply. You should not connect 2 strips in series and the maximum amount of wire used for a single circuit has to be under 4m total. Using a Dimmer is optional
Package Includes: 1x5 meter 12V Single Color 300 LED Strip
Specifications:
iP20 LED Strip with 3M adhesive
For indoor use only
Certification: cULus
Width: 6mm Height 1.4mm
5M roll, 60LED/m. 300 LED total
Strip width: 6mm
Available shades of white: 3000K, 4000K or 6000K
Can be cut: Every 3 LED (5 cm)
Required Power: 9W/m at 12V
Recommended Power: 11W/m at 12V
Heat sink: highly recommend
Dimmable: Yes with either through a remote control or a wall dimmer and dimmable power supply
LED Type: 2835 SMD
Lighting angle: 120 degrees
Luminus flux: 700-850 lm depending on shade of whiteApplications: Mainly used for indoor signage or backlighting logos and letters thanks to its unique M shape PCB.
Use of Adhesive Tape
If you're planning on installing your LED strip sideways or upside down, we strongly suggest using extra adhesive such as the Double Sided 3M 9495LE Tape for LED Strips.
Furthermore, we do not recommend sticking this product to wood surfaces. We suggest using a proper metallic surface to ensure proper heat dissipation. Improper heat dissipation may result in shorter lifespan, discoloration and/or great loss of brightness of your LED Strip.
Unsure of your Single Color LED Strip Selection?
Visit the Single Color LED Strip Buyer's Guide page for the basics of what you need to know about Single Color LED Strips to help you choose the correct LED Strip for your application.
