Wall Mounted RF Multi Zone Panel and-or Controller for CCT Adjustable LED Strip

Wall Mounted RF Multi Zone Panel and-or Controller for Warm White Cool White Adjustable LED Strip

Please note that starting from 03-09-2024, the controller included in this kit has been updated from FUT035 to E2-RF

It has finally arrived! LED Montreal keeps innovating and has just launched the Wall Mounted RF Multi Zone Panel Remote Control for Warm White Cool White Adjustable LED Strips to use with the Multi Zone Controller.

The Wall Mounted RF Multi Zone Panel and-or Controller for Warm White Cool White Adjustable LED Strip has fashionable tempered glass, and its touch screen is very stable and has a high speed wireless transmitting rate. The newest addition to the Multi Zone system is more than elegant with its newly developed technology and stylish look.  It is wireless and needs no wiring. You can either install it on a wall or surface of your choice with use of the included double sided adhesive tape, or with use of screws, or simply use it as a mobile remote control.

The Wall Mounted RF Multi Zone Panel Remote Control for Warm White Cool White Adjustable LED Strips operates on 2.4 GHz frequency, giving it with a range of up to 30 meters and features numerous functions for each zone you want to control. Control all Zones at once or each Zone individually. Set a delay and turn off your Strips automatically after 60 seconds at the touch of a button. Press the master ON button to turn on all linked lights or press for 5 seconds to turn on the indicating sound. Press the master OFF to turn off all linked lights, or press for 5 seconds and turn off the indicating sound. Use the Dimming Slider to change the brightness from 10-100%.

This is it! This is the newest technology to control your whole lighting universe. With the RF Multi Zone Remote and-or Controller for Warm White Cool White Adjustable LED Strips from LED Montreal, you can operate every Warm White Cool White Adjustable RF LED Strip in your house. You already have a setup at home but find it quite complex and uneasy to handle? There’s your chance to improve and make it a multi zone system. All you have to do is change the controllers for your LED strips and you can now control them all with the Multi Zone Remote. On the flipside, If you’re a newbie to all of this, you can start shaping your dream house with a 24V IP20 3014 Warm White Cool White Adjustable LED Strip Kit which includes the remote, controller and a 5 meter strip. Add as many controllers as you want and assign them all to one of the 4 available zones.

The 4 Zone set up is just awesome and so convenient!
A few examples:

• Control the lighting in your kitchen on Zone 1, your bedroom on Zone 2, your living room on Zone 3 and your recreation room on Zone 4.
• Divide a room in two zones and control one side with Zone 1 and the other side using Zone 2.
• Alternatively, you could set up the whole house on a single zone and have all your strips turn on and off in sync... that’s how powerful and versatile this kit is!

Setting up your kit is simple !

First, set up the output mode:
Press the "SET" button continuously to switch the output mode. The controller will log out if there's no operation within 3 seconds. Output modes are indicated by the color of the indicator light.

Red Light: Single Color
Green Light: CCT Adjustable White

Linking Code Instructions:
1. Connect your LED strip and transformer to the controller. Make sure the Strip turns on, then briefly press the SET button on the controller.

2. Briefly press the " | " button on the remote control (or the SET button on the K1) 3 times within 3 seconds.

3. The lights will flash slowly 3 times to indicate a successful connection.

4. If the connection fails, repeat the steps.

Unlinking Code Instructions:

1. Turn off for 10 seconds by unplugging the transformer, then plug it back in.

2. Briefly press the " | " button on the remote control (or the SET button on the K1) 5 times within 3 seconds.

3. The lights will flash rapidly 10 times to indicate a successful disconnection.

4. If the disconnection fails, repeat the steps.

Attention:
Turn off the power supply before installation.
Ensure the input voltage matches the device requirements.
Avoid using the device in areas with large metal surfaces or strong electromagnetic waves, as this may affect the remote distance.

 
As always, our team of experts is available should you have any question or require assistance putting your project together.