Got a question? Ask Mike!
Mike
.
Categories

12V 5m iP65+ High Output RGB 5050 LED Strip Kit - 30 LEDs/m

UL12RGB150K
$69.95
In stock
UL12RGB150K
+
Add to wish list
Delivery
Shipping time and rates:
Payment options
Our advantages
Find similar

12V 5m iP65+ High Output RGB 5050 LED Strip Kit - 30 LEDs/m

Bring your RGB LED game to the next level with this RGB Strip kit at 30LED/m from LED Montreal. Ideal for usage in your kitchen or bedroom, it’s also everyone’s favorite to light up your home bar space.  It is also fantastic to get the interior of your boat or RV ready for your next party. This Strip is not recommended for usage outside a boat or a vehicle.

This kit includes the following: a 5m roll of CDNLUX cULus Listed iP65+ RGB LED at 30 chips per meter, a 24 keys infra red remote with controller and a Class 2 12V 48W cUL listed power supply.

Regarding the strip: RGB Stands for Red-Green-Blue. 5050 RGB Chips give a 120-degree light beam and feature each of these 3 colors of LED lights within each chip: This allows to create up to two million different colors by mixing the red, green and blue at different levels. The 24 key remote will allow you to create 16 colors. Note that the RGB Chip does not create a true white. Should you want to use your Strip to both enhance your décor and get an ambient white light, we strongly suggest using our RGBW Strip that includes a white LED diode within the 5050 chips. 

RGB LED Strips have a 4-wire connection, meaning that they can only be operated through an RGB controller. The controller will allow you to dim your strip and change colors manually or through automated color change patterns. The strip cannot be dimmed through a standard wall dimmer

You can customize your LED Lighting set up as this Strip can be cut every 3 LEDS. The RGB LED Strip is flexible vertically but cannot be bent horizontally. Should you need to bypass an obstacle or turn a corner, we recommend removing the iP65+ sleeve with an x-acto knife and solder 4 strand wire onto your Strip. Soldering ensures a solid connection and minimal voltage loss. Quick connectors are available and are only recommended if you have 1 or 2 connections to make. Should you want to use a connector, use an iP20 grip and clip connector while making sure the remove both the top and bottom silicone of the Strip. 

Your RGB LED Strip is equipped with a high-quality 3M adhesive. This adhesive is intended for installation on a clean, non-glossy metallic surface. LED Strips were not designed to be installed on varnished or glossy wood surfaces. For porous surfaces, wet and marine environments or usage with IP 67 strips, we suggest using the Double Sided 3M Acrylic Tape for LED Strips.

 

The CDNLUX Difference:

There are many features that make the CDNLUX LED Strips stand out from the competition. First, the PCB (Printed Circuit Board). We use custom 3OZ PCB that ensures a consistent brightness throughout the 12V Strip. Unlike cheaper strips that can be found on the market, the CNDLUX Strip will allow you to connect to 10 meters in series without losing brightness. 

You will also be happy to know that CDNLUX uses High output chips on their LED Strips. This means that you will get the best brightness for your money out of each LED Chip. As a matter of fact, CDNLUX Chips are 25 to 30% brighter than chips used on lower prices LED Strips that you would find on discount websites. 

CDNLUX LED Strip are cULus Listed. This means that they have been tested for electrical safety according to Canadian Standards when powered with a compliant Class 2 Power supply. It also means that they will pass the toughest building inspections both in Canada and the USA. 

CNDLUX uses iP65+ Technology on their Strips. Lower end strips are waterproofed with silicon glue that tends to crack and lose its transparency with time. Furthermore, the silicon glue is only laid on top of the strip, leaving the back of the circuit board to humidity. The CDNLUX iP65+ technology protects your strip all around with a silicon sleeve that remains clear and flexible through time. The iP65+ coating is so efficient that a Strip equipped with this technology could be used outdoors, inside an aluminum channel in most provinces. If you are experiencing typical Canadian winters, we suggest using our iP67 Strip for outdoor applications.

With CDNLUX, you’re never on your own. Your LED Strip comes with the tech support and troubleshooting that you need to complete your project. All our representatives are based in Canada and are fully bilingual. You can reach us by email or by phone during business hours. Definitely not something you would get from an overseas seller on a discount website. 

 

Brand: CDNLUX
Model: MTL-FP10AGHWK-30ARGB
Certification: cULus E498952
Voltage available: 12VDC
Chip: Epistar 5050 RGB SMD
Lighting angle: 120 degrees
Can be cut: All 3 LEDs (10cm)
Strip Width: iP65+: 11mm
Self-adhesive
Power consumption: 7.2W / meter
Recommended transformer: 9W/ meter, must be powered by a Class 2 transformer
Operation temperature: 40C to -10C
Suitable for dry, damp and wet environment
Dimmable: Yes, through the remote/wall panel
Heat Dissipation: Not necessary, unless used in a commercial environment
Fields of Application:

Professional grade products

Canadian and American Certifications

Quantity discounts available

Create an online quote for your project