YL1 - Multi Zone WiFi RF Controller for RGB LED Strip (Mi-Light)

YL1 - Multi Zone WiFi RF Controller for RGB LED Strip (Mi-Light)

The Multi Zone RGB WiFi LED RGB LED Controller from LEDF Montreal is so versatile that you can control your 12V or 24V RGB LED Strips via Wi-Fi, RF remote control or the touch controls located directly on the controller. This Mi-Light controller also has the ability to be integrated to Amazon's Alexa system but this feature is not currently available to our Canadian customers.

Changing the colors and intensity of your RGB LED Strips via Wi-Fi is now easier than ever since everything is done directly via the free iOS or Android application. You read correctly! There is no external Wi-Fi module required to operate your RGB controller. The Mi-Light Cloud application allows you to run your LED lights from any Wi-Fi network around the world. Setting up your Mi-Light Cloud application is simple. Once you have registered an account and entered your information in the app, just click on the + icon at the top right of the screen to add a controller. Then choose the type of device you want to link to your Wi-Fi account and simply follow the instructions on the screen. You will need the password of your 2.4 GHz Wi-Fi router to complete the connection. The Controller will not work on a 5 GHz connection.

In addition to control over Wi-Fi, you can also change the colors of your RGB LED Strips with the touch control directly on the device. This is a fast and efficient way to access your lights if you do not have your mobile device or tablet on hand. The Touch control lets you change the color of your RGB LED lights in addition to their intensity and saturation. A button also gives you the option to choose from a variety of automatic color change modes.

But that's not all; you can also match your controller to a wall panel or a Multi Zone Mi-light controller for unparalleled control flexibility. To add your Wi-Fi Multi Zone RF Controller for RGB LED Strip, follow these instructions:

1. Disconnect the power source from the controller and turn off the LED light (s) you wish to program.
2. Reconnect the LED light and for the first 3 seconds, press the ON (|) button of the Zone you want to assign on the remote control 3 times.
3. The light will flash slowly 3 times to indicate that it has been successfully assigned.

Equipped with a RGB wire and a low voltage wire of 80cm each, the Multi Zone RF Wi-Fi Controller for RGB LED Strip has a maximum total capacity of 5 amperes at 12 or 24V. In a nutshell, here are the possible arrangements for this controller.

12V:
RGB 30 LED/m, up to 6m
RGB 60 LED/m, up to 3m

24V:
RGB 30 LED/m, up to 12m
RGB 60 LED/m, up to 6m

Technical specifications:

Model Number: YL1
Temperature for operation: -20 to 60 ℃
Voltage: DC12 ~ 24V
Output current: 3A / Channel
Total: Max.5A
Communication Mode: WiFi-IEEE 802.11b / g / n 2.4GHz
Communication Range: 30m
Color Change Modes: 16
Dimensions: 80mm x 17mm