120V RGB LED Strip Kit with IR controller – 25 Meter
120V RGB LED Strip Kit with IR controller – 25 Meter
This RGB LED Strip kit from LED Montreal can be installed in a set up of up to 25 meters long using a single power outlet while requiring only 200W.
The 120V 5050 RGB LED Strip kit can be used for indoor and outdoor projects, year-round. All components are certified to Canadian and US Standard by ETL Intertek. Featuring 60 individual 5050 chips per meter, this LED Strip will consume between 7 and 9 W per meter, depending on the color selected.
The 5050 Strip is controlled by a cETLus Listed Waterproof Infra Red controller that is rated for outdoor usage. This rugged controller can easily be installed almost anywhere, thanks to its 2 molded brackets. It is preferable to install your controller in an area where the signal of the remote control can reach it as the controller uses infra red technology. Should you choose to install multiple controllers, please be aware that the controllers cannot be synchronized.
Pre-install your 120V LED Strip using our 3M double sided tape then secure the Strip in place using the specially designed clips, connect it to the RGB Controler that connect into a 120V outlet and you‘re all set! Don’t need exactly 25 meters? Simply cut your Strip at the indicated location (each 50cm) and cover the end of the Strip with a silicone endcap. Please note that all caps must be secured with PVC glue. Any length you have left after your project can be reused by connecting it with another RGB Controler with a 120V plug.
Always disconnect the power cord of the controller prior to making any connections or modifications on the Strip.
The 120V LED strip does not fit inside our aluminum profiles because of the size of the 120V feed connector. This connector surrounds the strip on all sides, thereby increasing its overall size and making it too large for the profile. The aluminum profiles are designed to accommodate the dimensions of the strip itself, not taking into account the added bulk of the feed connector
120V RGB LED Strip Specs
Certification: cETLus
Input Voltage: 100-130V AC
Length: 25 meters
Width: 16mm
Height: 8mm
Can be cut: every 50cm
LED Density: 60 LED/m
LED Type: 5050 SMD
LED Brand: Epistar
Required Power: 7 to 9 W/m at 120V DC (inverter included)
Light Beam: 120 degrees
Protection: IP67 for indoor or outdoor use
LED Lifespan: 30 000 hours
Dimmable: Yes, with the remote
Self Adhesive : No
Warnings: Risk of Fire and Shock
Make sure that all connections and the end cap on the last segment are tightly secured to prevent the entry of water. We recommend using PVC Glue to secure any connectors or end caps. Connectors can also be secured with our transparent self-sealing heat shrink.
Make sure that all connections are tightly secured and that the clips and the LED Strip Lights are installed firmly and safely. You should inspect them periodically.
Disconnect power before adding segments.
Do not overload. Never exceed the length permitted by the manufacturer (25m)
Do not cover this product as the covering may cause the flexible light to overheat, melt or ignite.
Do not operate with the flexible light tightly coiled.
Do not puncture or splice the flexible lighting.
Do not route the cord or flexible lighting through walls, doors, windows or any like part of the building structure.
Do not use if there is any damage to the light or cord insulation.
Inspect periodically
To prevent overheating, Do not allow contact between flexible light cables or parts of the flexible light cable. Maintain at least 12mm spacing between light cable or light cable parts.
Do not install closer than 3 meters from a swimming pool surface.
Do not submerge the LED strip in liquids, or use the product in the vicinity of standi
Do not secure this product or its cord with staples, nails, or like means that may damage the insulation or permanently attach to the building structure.
Do not subject the LED Strip to continuous flexing.
Do not use with an extension cord unless plug can be fully inserted.
Do not alter or replace the plug.
When using outdoor 120v LED Strips, basic safety precautions should always be followed to reduce the risk of fire, shock, and personal injury, including the following:
a) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to be used for the outdoor use flexible lighting product.
b) Use only outdoor extension cords, such as type SW, SOW, STW,STOW, SJW, SJOW,SJTW, or SJTOW. This designation is marked on the wire of the extension cord.
