24V DC 5m LED RGB Neon Flex Dotless 96 LED/M
24V DC 5m LED RGB Neon Flex Dotless 96 LED/M
Create fun shapes and cool LED designs with the LED Neon Flex from LED Montreal. This super bright, plug and play LED Neon Flex is available in a 5 meter spool and comes with an included 24V 96W indoor power supply. The LED Neon Flex can be cut using a standard pair of scissors, by following the cut guides on the side of the tube.
The LED Neon Flex runs at 24V and consumes 15W per meter. The LED Neon Flex is not self adhesive and can be held in place with the Neon Flex Aluminum mounting clips. Measuring only 8mm wide by 16 mm high.
Want to give your LED Neon Flex display that special punch? Use our multi zones controller with 250 different colors, different flashing modes, variable speed within each mode plus dimming and on/off functions!
We suggest our aluminum profile for Neon Flex if you want to install straight lines of Neon Flex.
Specifications:
Certification: cULus E498952
Brand: CDNLUX
Voltage available: 24VDC
Chip: Epistar 5050 RGB SMD
5M roll, 96LED/m. 480 LED total
Lighting angle: 120 degrees
Neon Flex dimension: 8mm x 16mm
Power consumption: 15W / meter
Recommended transformer: 18.75W/ meter, must be powered by a Class 2 transformer
Operation temperature: 40C to -10C
iP rating: iP65+
Suitable for dry, damp and wet environment
Dimmable: Yes, through the remote / wall panel remote
Heat Dissipation: Not necessary, unless used in a commercial environment
*RGB: Red-Green-Blue
