Got a question? Ask Mike!

2024 Quebec construction holiday: The store/pick up counter will be closed from Jul. 19th to Aug. 4th.
Orders received during that period will start to ship/be available for pickup as of Aug.5th.


120V 25m iP65 2835 Single Color LED Strip - 39 LEDs/m

You save: $40.00
In stock
Add to wish list
Shipping time and rates:
Payment options
Our advantages

120V 25m iP65 2835 Single Color LED Strip - 39 LEDs/m

The 120V LED Strip boldly goes where no Strip has gone before! Using 120V DC technology, this LED Strip from LED Montreal allows you connect 2 Strips together to make a continuous strand of up to 50 meters using a single power outlet while requiring less power than 3 standard 50W bulbs for the entire set up. 

The 120V 25m 2835 LED Strip can be used for indoor and outdoor projects, year round. Imagine how great your cabana, your gazebo or the roof of your house will look! Featuring 39 individual 2835 chips per meter, this LED Strip boasts an impressive 425 lumens per meter. The 120V 2835 LED Strip will give you lighting at 120 degree and is offered in Warm White  or Cool White. Please note that the Strip is not self adhesive and is not dimmable. 

Installing the 120V LED Strip is easy with the 120V LED Strip Accessories and Connectors. Pre-install your 120V LED Strip using our 3M double sided tape then secure the Strip in place using the specially designed clips, connect it into a 120V outlet and you‘re all set!  Don’t need exactly 25 or 50 meters? Simply cut your Strip at the indicated location and cover the end of the Strip with available cap. Corners can also be easily turned with the optional corner connectors. Please note that all caps and connectors have to be secured with PVC glue. Any length you have left after your project can be reused by connecting it with the special power cord. Do not use a standard AC power cord as your LED Strip does require a DC inverter, which is already integrated in the compatible power cord.


120V LED Strip Specs

Length: 25 meters
Can be cut: every 90cm
Strip width: 11.5 mm Strip Height: 6.5mm
LED Density: 39 LED /m
Required power: 1.6 W/m at 120V DC (inverter included)
Light beam: 120 degrees
Luminous flux: 425 Lumens/m
Available colors: 3000K or 6000k
Protection: iP65
LED lifespan: 50 000 hours
Dimmable: No
Certification: cULus

When using electrical products, basic precautions should always be followed, including the following:


Warnings: Risk of Fire and Shock

Make sure that all connections and the end cap on the last segment are tightly secured to prevent the entry of water. We recommend using PVC Glue to secure any connectors or end caps.

Make sure that all connections are tightly secured and that the clips and the LED Strip Lights are installed firmly and safely. You should inspect them periodically.

Disconnect power before adding segments.

When extending your kit, use the same model of LED Strip Lights.

Do not overload. Never exceed the length permitted by the manufacturer

Do not cover this product as the covering may cause the flexible light to overheat, melt or ignite.

Do not operate with the flexible light tightly coiled.

Do not puncturecutshorten, or splice the flexible lighting.

Do not route the cord or flexible lighting through walls, doors, windows or any like part of the building structure.

Do not use if there is any damage to the light or cord insulation.

Inspect periodically

To prevent overheating, Do not allow contact between flexible light cables or parts of the flexible light cable. Maintain at least 12mm spacing between light cable or light cable parts.

Do not install closer than 3 meters from a swimming pool surface.

Do not submerge flexible light in liquids, or use the product in the vicinity of standing water or other liquids.

Secure this flexible light using only the hangers or clips available at LED Montreal

Do not secure this product or its cord with staples, nails, or like means that may damage the insulation or permanently attach to the building structure.

Do not subject flexible lighting to continuous flexing.

Do not use with an extension cord unless plug can be fully inserted.

Do not alter or replace the plug.


When using outdoor portable lighting products, basic safety precautions should always be followed to reduce the risk of fire, shock, and personal injury, including the following:

a) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to be used for the outdoor use flexible lighting product. 

b) Use only outdoor extension cords, such as type SW, SOW, STW,STOW, SJW, SJOW,SJTW, or SJTOW. This designation is marked on the wire of the extension cord.

Professional grade products

Canadian and American Certifications

Quantity discounts available

Create an online quote for your project