12V 5m iP20 Bendable Super Bright RGB 5050 LED Strip - 42 LEDs/m (Strip Only)

12V 5m iP20 Bendable Super Bright RGB 5050 LED Strip - 42 LEDs/m (Strip only)

Always wanted to backlight letters or oddly shaped objects but regular LED Strips would not do the trick? Well, your search is over with the new 12V Bendable 5050 RGB Strip from LED Montreal. Thanks to its unique M shape PCB, this 12V LED Strip can be twisted to just about any shape. Offered in 5 m length, the Strip can be cut at every 3 LED (7.2cm) to perfectly fit your project. The Bendable 12V RGB Strip features authentic high performance Epistar chips that provide a light up to 50% brighter than standard RGB Strips.  

To ensure high flexibility, this LED Strip does not come with a silicone coating and should only be used indoors. Should you need to connect letters together, we recommend soldering multi braid RGB wire on the exposed copper connections. There are no quick connectors available for this product. You should not connect 2 strips in series and the maximum amount of wire used for a single circuit has to be under 4m total.

Do not need a multicolor display? The Bendable LED 12V LED Strip is also available in Single Color.

Specifications:

iP20 LED Strip with 3M adhesive
For indoor use only
Certification: cULus
Width: 12mm
Height: 1.7mm
5M roll, 42 LED/m. 210 LED total
Can be cut: Every 3 LED (7.2 cm)
Required Power: 9W/m at 12V
Recommended Power: 11W/m at 12V
LED Type: Epistar 5050 SMD, 42LEDS per meter
Lighting angle: 120 degrees
Typical light output: Red 620-625nm Green 515-520nm Blue 465-470nm
Cuttable: every 3LED (7.2cm)
Waterproofing available: iP20
Dimmable: Through remote control only
Heat sink: highly recommend
Applications: Mainly used for indoor signage or backlighting logos and letters thanks to its unique M shape PCB.  

Heat Dissipation:

We do not recommend sticking this product to wood surfaces.  We suggest using a proper metallic surface to ensure proper heat dissipation. Improper heat dissipation may result in shorter lifespan, discoloration and/or great loss of brightness of your LED Strip.