24V 1m to 8m iP20 3528 LED Single Color LED Strip 120 LED per Meter (strip only)

24V 1m to 8m iP20 3528 LED Single Color LED Strip 120 LED per Meter (strip only)

At LED Montreal, we understand that the traditional / industry standard 5m LED Strip may not be suitable for all projects. Therefore, we have decided to bring you our most popular iP20 24V models in lengths up to 8 continuous meters .

Available in 1m increments, our custom LED strips can then be cut every 5cm to perfectly meet your project needs.
 
Custom-made for you, they are available within 72 working hours and will be equipped with the soldered connection of your choice: 30cm of 20 AWG wire, 1m of 20AWG wire or a 17cm DC female connector.

Our cULus Listed 3528 LED Strip offers 120 LED lights per meter, a brightness of 800lm per meter and an illumination angle of 120 degrees. Versatile, it can be cut to every 6 LED lights (approx. 5cm). To better suit your existing decor, it is offered in several variations of White: Warm White (2700K), Warm White (3000k), Soft White (3500k) ,Natural White (4000k) Daylight (5000k) and Cool White (6000k).

The cULus Certified 3528 LED Strip requires an input power of 9.6W per meter (although to ensure optimum performance from your Power supply we recommend 12W / m) and can be dimmed using a compatible dimmer. The 3528 at 120 LED / m LED Strip allows you to obtain continuous LED lighting, without visible hot spots, when the Strip is installed in our aluminum profile specially designed for this type of effect. Imagine the amazement of your guests when they see this thin bar of light with neon-like effects! Its intermediate brightness is ideal for the under-cabinet lighting.

In order to ensure that you get the maximum performance from your 3528 LED Strip, we recommend that you install it in an aluminum profile. This will dissipate the heat, allow optimal adhesion of the adhesive tape of your LED Strip and protect it from dust since it is not covered.

All compatible transformers for 24V Strips are available here. See our page about transformers to learn more about powering LED strips.


Specifications:
Brand: CDNLUX
Model: MTL-FP8AEIDJ-120AXX
Certification: cULus E498952
Available voltage: 24VDC
Chip: Epistar 3528 SMD
120 LED chips per meter
Lighting angle: 120 degree
Can be cut: Every 6 LEDs (5cm)
Strip Width: iP20: 8mm
Available lengths: 1m to 8m
Self-adhesive: 3M
Power consumption: 9.6W / meter
Recommended transformer: 12W / meter, must be powered by a class 2 transformer
Typical luminous flux: 800 lumens / m (varies according to the degrees Kelvin chosen)
Available colors: 2700K / 3000K / 3500K / 4000K / 5000K / 6000K
Operating temperature: 40C to -10C
Suitable for a dry environment
Dimmable: Yes, through a wall / remote panel or a dimmable transformer
Heat dissipation: recommended, especially if used in a commercial environment

Specifications:

Brand: CDNLUX
Certification: cULus for Canada and USA E498952

Chip: Epistar 3528 SMD
Chip density: 120 LEDs per meter
Can be cut: All 6 LEDs (5cm)
Length: 1 to 8 meters
Width: 8mm
Height: 2mm

Voltage: 24V DC
Power consumption: 9.6W/m
Recommended power supply: 12W/m, Class 2 power supply required
Recommended power supply for 8m: 96W, Class 2 power supply required
Typical luminous flux: 800 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 2700K / 3000K / 4000K / 5000K / 6000K
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: Female DC plug (17cm) on one end and 2 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Not necessary but recommended to be installed on a heat dissipating surface or in appropriate aluminum channel

Spec Sheet (PDF)