- — Visa and MasterCard
- — PayPal
- — Buy in store
- — Create a quotation and pay later
- — Professional grade
- — Canadian and American Certifications
- — Items in stock, orders ship out quickly
- — Buy in store or online
- — Custom project support
24V 5m iP20 10mm COB LED strip - Warm White to Cool White Adjustable
Get a thin linear lighting effect (10mm wide and 2mm thick) that is also elegant and bright with LED Montreal's Continuous Lighting (Dot less) COB LED Strip. UL Certified for use in Canada and the United States, Thanks to the special CCT Adjustable Remote and Controller, you can control the color temperature of your white from 2700K to 6500K in increments of approximately 300K and dim your LED Strip. Furthermore, the Multi Zone system will let you control and unlimited amount of controllers divided in up to 8 zones. Read more about our Multi Zone system here. You can cut your thin COB Strip every 62.5mm and solder extension wires on the copper connections.
This professional-grade COB product has a 3OZ copper circuit board that allows for better lighting consistency and superior heat dissipation. Its high color rendering index (CRI) of more than 90 makes it a product of choice for the demanding customer. The COB LED Strip consumes 14.4W per meter at 24V DC. The 5m long Strip is equipped with a set 3 wires of 150mm at each end.
The 10mm COB LED Strip is intended for indoor use only in dry locations. To maximize the lifespan and the COB LED light, we recommend that you affix it to an aluminum surface to properly dissipate its heat. Installing this product on a wood or gypsum surface may affect its performance and lifetime of the product.
We want your project to be a success all along the line, which is why we advise you to carefully read the installation guide for Low Voltage LED Strips prior to starting your project.
Available voltage: 24V DC
5 Meter strip
Circuit board: 3 Ounces
Available colors: Tunable White 2700K to 6500K
Luminous flux /m at full intensity: Between 660lm (2700K) to 742lm (6500K)
Lighting angle: 98.4 Degrees
Can be cut: Every 62.5mm
Width: iP20: 10mm
Adhesive: 3M Sticker
Power consumption: 14.4W/meter
Recommended transformer: 18W/meter, must be powered by class 2 transformer
Operating temperature: 40C to -10C
Suitable for dry, humid environment. Indoor use only.
Dimmable: Via remote control
Heat dissipation: Recommended
Wire Color Code
Red Wire: +
White Wire: - (Cool White)
Yellow Wire: - (Warm White)