24V 5m iP20 2216 Single Color LED Strip - 300 LEDs/m (Strip Only)

24V 5m iP20 2216 Single Color LED Strip - 300 LEDs/m (Strip Only)

Experience premium illumination without compromising affordability with our CDNLUX 24V, 2216 LED Strip. This meticulously engineered LED strip is designed to provide exceptional ambient lighting at an unparalleled cost, making it an ideal choice for sophisticated accent lighting in any room.

Featuring 300 Epistar 2216 SMD LED chips per meter, each measuring 2.2mm x 1.6mm, this strip delivers a broad 120-degree light beam and an impressive light output of 1450 lumens per meter with a 90+CRI that provides amazing color rendition. The 10mm wide strip is available in six variations of white – 2700K, 3000K, 3500K, 4000K, 5000K and 6000K, catering to diverse lighting requirements.

Constructed with a high-quality 2 OZ PCB (Printed Circuit Board), our LED strip ensures consistent brightness. The Strip is cULus Listed, guaranteeing compliance with rigorous electrical safety standards for both Canadian and US installations when powered with a Class 2 Power supply.

The IP20-rated design offers no protection from water and dust, and the strip is affixed with a reliable 3M adhesive, suitable for installation on clean, heat-dissipating surfaces like aluminum profiles. To obtain top of the line, dot less lighting that provides unequaled brightness and color rendition while properly dissipating the heat from the 2216 Strip, we recommend installing it in the LUX740 profile with a Premium diffuser. We do not suggest using the LUX710 as the volume of aluminum of this profile may not properly dissipate the heat generated by the light. 

For seamless integration into your lighting setup, the strip comes in a 5m spool with 2 connections, a female DC plug on one end and 2 wires on the other end, enabling easy connection with a plug-in power supply or a hard-wired power supply. The strip can be conveniently cut every 6 LEDs (2cm), providing flexibility in customization.

To accommodate various lighting requirements, our 2216 LED strip is fully dimmable. You can control the dimming through a remote, wall panel, or utilize an LED compatible wall dimmer when paired with our dimmable power supplies.

With a power consumption of 17W per meter and a recommended transformer rating of 19W/m, our LED strip ensures energy efficiency while maintaining optimal performance. Operating within a temperature range of 40°C to -10°C, this strip is suitable for indoor use only, providing a reliable and durable lighting solution.

Specifications:

Brand: CDNLUX
Model: MTL-FP10AIIDJ-300AXX --- XX denotes the type of white WW (Warm White), NW (Natural White), CW (Cool White)
Certification: cULus for Canada and USA E498952

Chip: Epistar 2216 SMD
Chip density: 300 LEDs per meter
Can be cut: All 6 LEDs (20mm)
Length: 5 meters
Width: 10mm
Height: 1.2mm

Voltage: 24V DC
Power consumption: 17W/m
Recommended power supply: 19W/m, Class 2 power supply required
Recommended power supply for 5m: 96W, Class 2 power supply required
Typical luminous flux: 1450 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 2700K / 3000K / 3500K / 4000K / 5000K / 6000K
CRI: 90+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: Female DC plug (17cm) on one end and 2 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel

Spec Sheet (PDF)