24V 5m iP20 3528 White LED Strip - 180 LEDs/m (Strip Only)

24V 5m iP20 3528 White LED Strip - 180 LEDs/m (Strip Only)

LED Montreal offers a complete range of CDNLUX Certified Low Voltage LED Strips intended for industry professionals such as designers, architects, and cabinetmakers. Our Certified 24V LED Strips will perfectly answer your clientele’s certification needs, even if their project is in the USA.

This 3528 LED Strip offers 180 LEDs per meter over a 5m Strip for a total of 900 LEDs per Strip, a brightness of 1000 lumens per meter and a 120-degree lighting angle. It offers a High Color Rendition Index (CRI) of 95+. Versatile, it can be cut at every 6 LED (approx 3.5cm) to perfectly fit your project. To better suite your existing decor, we have made the Certified 3528 Strip available in various shades of white, see the pull-down menu for availabilities.

The 3528 LED Strip with 180 LED per meter requires 14.4W of power per meter (we recommend using 18W to ensure a proper load on your LED driver) and can be dimmed with one of our compatible dimmers or Dimmable LED Drivers. The Certified 3528 LED Strip emits a continuous flow of Light (without the standard dot effect of LEDs) when you combine it with our specially designed LED Aluminum profile. We recommend using our LUX740 profile with the Premium Diffuser to get a bright, crisp and dot less lighting. This strip is ideal for under counter lighting as it produces a good luminous flux without being overly bright.

It is highly suggested to use this LED Strip with a proper heat sink. Most used heat sink are aluminum profiles as they also protect your uncoated strip from dust while ensuring that your LED Strip perform at its best for the longest time.

Looking for a power supply for your 24V Strip? Visit our 24V power supply section here. Keep in mind that your Strip will require 18W per meter and that you must use a Class 2 driver (power supply).

Rated at iP20, this LED Strip offers no protection from water and dust. Furthermore, there are no solderless connectors available for the Certified 3528 LED Strip. Given its high intensity, we recommend using 20 AWG wire should you need to make connections between parts of LED Strips.

Specifications:

Brand: CDNLUX
Model: MTL-FP8AEIDJ-180AXX --- XX denotes the type of white WW (Warm White), NW (Natural White), CW (Cool White)
Certification: cULus for Canada and USA E498952

Chip: Epistar 3528 SMD
Chip density: 180 LEDs per meter
Can be cut: All 6 LEDs (35mm)
Length: 5 meters
Width: 8mm
Height: 2mm

Voltage: 24V DC
Power consumption: 14.4W/m
Recommended power supply: 18W/m, Class 2 power supply required
Recommended power supply for 5m: 90W, Class 2 power supply required
Typical luminous flux: 1000 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 3000K / 3500K / 4000K / 5000K
CRI: 95+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: Female DC plug (17cm) on one end and 2 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel

Spec Sheet (PDF)