24V 5m iP20 3535 RGB LED Strip - 120 LEDs/m (strip only)

24V 5m iP20 3535 RGB LED Strip - 120 LEDs/m (Strip Only) 

This is the RGB LED strip that you have been waiting for! This cULus Listed 3535 RGB LED Strip offers an incredible 120 LED chips per meter for a brightness second to none. Consuming 22.5W per meter, it needs to be installed in a proper aluminum channel for adequate heat sink. It is so bright that it can actually produce a neon-like, no dot lighting when used with our continous lighting profile. This LED strips offers creative options for upgrading the lighting of any room or commercial window display. It’s also the coolest way to decorate bars and display counter. This 3535 RGB LED strips is self adhesive and comes with wires on each end. There are no connectors available for this Strip. Our team will be glad to assist you in creating custom RGB LED bars for a minimal fee.

Specifications:

Brand: CDNLUX
Model: MTL-FP12AGSIDJ-120ARGB
Certification: cULus for Canada and USA

Chip: Epistar 3535 RGB SMD
Chip density: 120 LEDs per meter
Can be cut: All 6 LEDs (50mm)
Length: 5 meters
Width: 12mm
Height: 2mm

Voltage: 24V DC
Power consumption: 18W/m
Recommended power supply: 22.5W/m, Class 2 power supply required
Recommended power supply for 4m: 90W, Class 2 power supply required
Available colors: RGB (Red, Green, Blue)
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: 4 wires (17cm) on one end and 4 wires (17cm) on the other end
Dimmable: Yes, with a low voltage controller/remote combo
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel

*Please note that this product is not protected from the elements and should always be used inside an aluminum channel .

To operate this LED strip, you will need an RGB controller and a 24V power supply, using 22.5W per meter.