24V 5m iP67 RGB+W 5050 LED Strip - 60 LEDs/m (Strip Only)

24V 5m iP67 RGB+W 5050 LED Strip - 60 LEDs/m (Strip Only)

Want the best, most colorful outdoor RGB LED lighting setup with a true white that you can use outdoors on your patio, gazebo, RV, trailer, boat, cottage or anywhere outside? The 24V iP67 300 5050 RGB+W LED Strip (Strip Only) from LED Montreal is what you need in order to impress all your neighbours! The W in RGB+W means the RGB strip has an extra chip that is actually white. With the RGB strip, when all LEDS are at their maximum brightness, the light perceived “seems” white. While a RGB strip can deliver something that is close to white, a white LED chip gives you a true white.

What does IP67 mean in the 24V iP67 300 RGB+W LED Strip?

IP stands for the International Protection marking, which is an IEC (International Electrotechnical Commission) standard. The first digit (6) stands for its resistance to dust and general dirt and sand. The second digit (7) provides certification for water resistance. iP67 means that the strip is protected from total dust ingress, and is splash and water resistant. Generally speaking, your strip is perfect for outdoors use through all sorts of weather.

Note that to operate this LED strip, you will need an RGB+W controller and a 24V 3A power supply. The drop down will allow you to pick your preferred length of RGB+W LED strip to perfectly match your needs!

Note that only the LED strip is waterproof, the connectors at both ends of the strip are not waterproof and must not be in contact with water or moisture. You can use extra silicon and heat shrink tube to make your setup safer.

Specifications:

Brand: CDNLUX
Model: MTL-FP12AGIWM-60ARGBW
Certification: cULus for Canada and USA E498952
Product code updated on 05/16, previous code: 24VRGBW5M67

Chip: Epistar 5050 RGBW SMD 4 in 1
Chip density: 60 LEDs per meter
Can be cut: All 6 LEDs (100mm)
Length: 5 meters
Width: 14.5mm
Height: 5mm

Voltage: 24V DC
Power Consumption: 9.6W/m at 24V on Multi Zone Controller
                                  14.4W/m at 24V on 5 in 1 RF Multi Zone Controller
Recommended Power: 12W/m at 24V on Multi Zone Controller
                                    18W/m at 24V on 5 in 1 RF Multi Zone Controller
Recommended power supply for 5m: 96W, Class 2 power supply required
Typical luminous flux on white: 400 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: RGB + White (3000K, 4000K or 6000K)
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP67
Suitable environment: Suitable for dry, humid environment. Indoor and protected outdoor use.
Operating temperature: 40C to -10C
Connections included: 5 wires (17cm) on one end and 5 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo
Heat dissipation: Not necessary but recommended to be installed on a heat dissipating surface or in appropriate aluminum channel

RGBW-24V-5050-LED-Strip-EN-CDNLUX.pdf