FUT037 1 to 8 Zones Self repeating RF RGB LED controller

1 to 8 Zones Self repeating RF RGB LED controller - FUT037 (Upgraded)

Please note that this model is now discontinued and has been replaced by the E3RF model. The FUT037 will remain available while supplies last (see count). The next-generation E3RF model offers quick plug in terminal blocks that simplify connections and a faster programming procedure, providing you with a better user experience and optimized installation.

This controller can be used with either the 4 or 8 zone remote and panel. This means that you no longer need to change your controllers should you need to expand from 4 to 8 zones! All you need to do is change your remote or wall panel and reprogram your controllers to the new remote!

But the remote control is not the only way to control your RGB Controller! You can also add the 2.4 GHz WiFi Gateway (sold separately) to control your lights from your phone from anywhere in the world using a WiFi or a mobile 4G connection. The WiFI gateway supports third party voice controls such as Amazon Alexa and Google Assistant. Note that the zone option may not be offered on 3rd party applications and that LED Montreal does not support these interfaces.
 
This controller offers more color than ever. Thanks to the saturation control, you can create multiple variants of your favorite color. Saturation allows you to turn make pastel colors, something that cannot be achieved with lower priced – lower end controllers. You can also choose from 9 pre-set color changing modes. All the modes can be dimmed, and the speed of the color changes are completely adjustable.

About the zones: You will need at least one Controller per zone. Each zone can be composed of Multiple controllers. If you put More than one controller on a Zone, al controllers will all act as one, thanks to the auto-transmitting/auto-synchronizing feature of this RGB Controller. If one of the controllers is within the range of your remote control, all the other controllers assigned to the zone with will together. Simply put, you could have a kilometer long of Strips and they will be synchronized given there is a controller every 30m. And yes, this is all done wirelessly! This kind of set up lets you use several power supplies for a bigger set up without losing voltage and brightness.

You no longer need multiple remotes for your different types of LED strips. The FUT Controller family now lets you mix different types of LED Strips on a single remote. Just make sure that you follow these simple rules to do so: There can only be one type of LED Strips per Zone. So, if you put a Single-Color Strip on Zone 2, all Strips on Zone 2 must be Single Color and will be operated at once.


Adding on to a Zone is easy! 
For a new product or a product that has never been linked before:

1. Disconnect the power supply from the controller to switch off the light(s) you want to program.
2. Turn the light back on and within 3 seconds; press three times on the ON " | " button of the zone you want to assign (1 to 4) on the remote control.
3. The light will slowly flash 3 times to indicate that it was successfully linked.

You can repeat this procedure for each controller that you want to add to your Zone.

 
Change a light from one zone to another. 
If the light you want to add to a zone was previously assigned to a different one, you will first need to unlink that light.

1. Identify which zone the light is currently assigned to.
2. Disconnect the power supply to turn off the light(s) you want to program.
3. Power the light back on and within 3 seconds; press the ON " | " button of the previously assigned zone 5 times quickly.

You can then proceed and program your light according to the add-on procedure outlined above.


Specifications:
Model: FUT037 (Upgraded)
Working Voltage: 12V / 24V DC
Max output: 6A/Channel
Total output Max.: 12A
Working Temperature: -20 to 60C
RF: 2.4GHz
Maximum Control Distance: 30m
Output Connection: Common anode
Size: 119mm x 37.5mm x 22mm

Compatible Remotes (sold separately):

3 Zones RF Vertical Remote for all types of LED strips: Y3
4 Zones RF Remote for RGB and RGB+W: FUT096
4 Zones RF Remote for all types of LED strips: FUT092
4 Zones RF Remote for all types of LED strips: C5
4 Zones RF Wall Mounted Panel for for RGB and RGB+W: B3
4 Zones RF Wall Mounted Panel for for all types of LED strips: B4
8 Zones RF Remote for all types of LED strips: FUT089
8 Zones RF Wall Mounted Panel for for all types of LED strips: B8