12V 1.2m (4') iP65+ 3528 Single Color LED Strip - 120 LEDs/m (Strip Only)

12V 1.2m (4') iP65+ 3528 Single Color LED Strip - 120 LEDs/m (Strip Only)

Good things do come in small packages and the 120 LEDs 12V 3528 iP65+ 1.2m Single Color LED Strip is no exception. Offered in Warm White (3000K), Natural White (4000K), Cool White (5000K), it’s the perfect lighting accessory for smaller areas that require a unique accent lighting. Imagine how great your shelves or home display will look when enhanced by a soft and subtle LED Lighting. 

The technical stuff: the chips on this Strip are called 3528 because they measure 3.5mm x 2.8mm. These Chips give a 120-degree light beam and a light output of 800 lumens per meter (lumens output only applies to white Strips). The 12V 3528 Single Color Strip features an iP65+ silicone coating that makes the Strip easy to clean while protecting it from humidity and liquid damage. The iP65+ coating will not crack or deteriorate over time, like lower end silicon glue coating would. 

Your LED Strip is equipped with a high-quality 3M adhesive. This adhesive is intended for installation on a clean, non-glossy metallic surface. LED Strips were not designed to be installed on varnished or glossy wood surfaces. For porous surfaces, wet and marine environments or usage with IP 67 strips, we suggest using the Double Sided 3M Acrylic Tape for LED Strips.

This Single Color 12V Led Strip is cULus Listed. This means that is has been tested for electrical safety according to Canadian Standards when powered with a compliant Class 2 Power supply. It also means that it will pass the toughest building inspections both in Canada and the USA. 

Forecast a power supply at 12VDC of 12W (1A) per meter for your installation. As stated earlier, this strip comes in a 1.2m spool and is equipped with a female DC connectors on one end and 2 wires on the other end. If you need space between the power supply and the strip, you will be pleased to learn that It is fully compatible with our 1 m or 2m DC extension for an easy plug and play installation. Its low energy consumption allows you to power your strip with a 12VDC battery pack. 

You can customize your LED Lighting set up as this Strip can be cut every 3 LEDS. The 1.2m 3528 Strip is flexible vertically but cannot be bent horizontally. Should you need to bypass an obstacle or turn a corner, we recommend removing the iP65+ sleeve with an x-acto knife and solder 2 strand wire onto your Strip. Soldering ensures a solid connection and minimal voltage loss.

The 120 LEDs 12V 3528 iP65+ 1.2m Single Color LED Strip is fully dimmable. You can either dim it through a remote control or a wall panel with one of our low voltage dimmers or you can dim it using an LED compatible wall dimmer when combined with one of our dimmable power supplies.

This high quality Strip features our revolutionary iP65+ waterproofing technology. The iP65+ coating protects your strip all around with a silicon sleeve that remains clear and flexible through time. iP65+ strips are ideal for indoor and light duty outdoor usage. For outdoor applications where the strip will be directly exposed to the elements, we recommend iP67+ grade strips.

Specifications:

Brand: CDNLUX
Model: MTL-FP8AEHWK-120AXX
Certification: cULus for Canada and USA E498952

Chip: Epistar 3528 SMD
Chip density: 120 LEDs per meter
Can be cut: All 3 LEDs (25mm)
Length: 1.2 meters
Width: 10mm
Height: 4.25mm

Voltage: 12V DC
Power consumption: 9.6W/m
Recommended power supply: 12W/m, Class 2 power supply required
Typical luminous flux: 800 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 3000K / 4000K / 5000K
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP65+
Suitable environment: Suitable for dry, humid environment. Indoor and protected outdoor use.
Operating temperature: 40C to -10C
Connections included: Female DC plug (17cm) on one end and 2 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Not necessary but recommended to be installed on a heat dissipating surface or in appropriate aluminum channel