24V 25m iP20 3014 White LED Strip - 120 LEDs/m (Strip Only)

24V 25m iP20 3014 White LED Strip - 120 LEDs/m (Strip Only)

This 25-meter LED strip is designed for large-scale projects, ideal for clients looking to minimize waste and create custom lengths. It is crucial to note that this strip should not be used in its entirety in one continuous section. To comply with building codes, the maximum recommended length is 6.6 meters per section, due to the maximum transformer power limited to 96W (96W divided by 14.4W/m). This precaution is essential to ensure the safety of your installation.

This LED Strip is supplied in bulk without connectors, offering total flexibility for customizing your lighting installation.

The certified 3014 LED Strip offers 120 LED lights per meter, an exceptional brightness of 1100 lm per meter, and a 120-degree lighting angle. Versatile, it can be cut every 6 LED lights (approx. 5cm). To better suit your existing decor, it is available in various shades of white: Incandescent White (2700K), Warm White (3000K), Soft White (3500K), Natural White (4000K/4500K), Daylight (5000K), and Cool White (6000K).

The 3014 LED Strip, certified with 120 LEDs per meter, requires a power supply of 12W per meter (we recommend a 14.4W/m power supply) and can be dimmed using a compatible dimmer. This impressive power gives the 3014 LED Strip unparalleled brightness, allowing for continuous LED lighting without visible points when the Strip is installed in our specially designed LED Aluminum profile for this effect. Imagine the amazement of your guests when they see this thin light bar with neon-like effects when your LED is installed in the LUX740 profile with the Opaline lens!

Like any High-Intensity Strip, the 3014 LED Strip must have adequate heat dissipation to ensure its performance and durability. Attempting to install this LED Strip on a non-compliant surface will permanently damage it. Therefore, you must install the 3014 LED Strip in a compatible aluminum bar.

You can customize your LED lighting installation as this Strip can be cut every 6 LEDs. The 3014 24V LED Strip is vertically flexible but cannot be bent horizontally. If you need to bypass an obstacle or turn a corner, we recommend soldering a wire with two connectors to your Strip. Soldering ensures a solid connection and minimal voltage drop.

The 120 LEDs 24V 3014 IP20 Strip is fully dimmable. You can vary the intensity of your Strip using a remote control or wall panel with one of our low-voltage dimmers, or you can vary the intensity using your standard wall dimmer in combination with one of our dimmable transformers.

Looking for a power supply for your 24V Strip? Visit our 24V power supply section here. Consult our page about power supplies to know more about the required power for your LED strip.

This LED Strip is rated IP20, so it offers no water protection. Due to its high intensity, you must install 20-gauge wire if you wish to make connections on this LED Strip.

Specifications:

Brand: CDNLUX
Model: MTL-FP10AFIDJ-120AXX --- XX denotes the type of white WW (Warm White), NW (Natural White), CW (Cool White)
Certification: cULus for Canada and USA E498952

Chip: Epistar 3014 SMD
Chip density: 120 LEDs per meter
Can be cut: All 6 LEDs (50mm)
Length: 5 meters
Maximum Length allowed by the cULus certification and existing electrical codes: 6.6 meters (see description)
Width: 10mm
Height: 2mm

Voltage: 24V DC
Power consumption: 12W/m
Recommended power supply: 14.4W/m, Class 2 power supply required
Recommended power supply for 5m: 72W, Class 2 power supply required
Typical luminous flux: 1000 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 2700K / 3000K / 3500K / 4000K / 5000K / 6000K
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: No connections included, solder is necessary
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel

Spec Sheet (PDF)