24V 25m iP20 3528 White LED Strip - 120 LEDs/m (Strip Only)

24V 25m iP20 3528 White LED Strip - 120 LEDs/m (Strip Only)

This 25-meter LED strip is designed for large-scale projects, ideal for clients looking to minimize waste and create custom lengths. It is crucial to note that this strip should not be used in its entirety in one continuous section. To comply with building codes, the maximum recommended length is 8 meters per section, due to the maximum transformer power limited to 96W (96W divided by 12W/m). This precaution is essential to ensure the safety of your installation.

This LED Strip is supplied in bulk without connectors, offering total flexibility for customizing your lighting installation.

The certified 3528 LED Strip offers 120 LED lights per meter, an exceptional brightness of 800 lm per meter, and a 120-degree lighting angle. Versatile, it can be cut at every 6 LED (approx 5cm) to perfectly fit your project. To better suit your existing decor, it is available in various shades of white: Incandescent White (2700K), Warm White (3000K), Soft White (3500K), Natural White (4000K/4500K), Daylight (5000K), and Cool White (6000K).

The 3528 LED Strip with 120 LED per meter requires 9.6W of power per meter (we recommend using 12W to ensure a proper load on your LED driver) and can be dimmed with one of our compatible dimmer. The Certified 3528 LED Strip emits a continuous flow of Light (without the standard dot effect of LEDs) when you combine it with our specially designed LED Aluminum profile. Imagine the amazement of your guests when they see this thin light bar with neon-like effects when your LED is installed in the LUX740 profile with the Opaline lens! This strip is ideal for under counter lighting as it produces a good luminous flux without being overly bright.

It is highly recommended to use this LED Strip with a proper heat sink. Most commonly used heat sink are aluminum profiles as they also protect your uncoated strip from dust while ensuring that your LED Strip perform at its best for the longest time.

You can customize your LED lighting installation as this Strip can be cut every 6 LEDs (5cm). The 3528 24V LED Strip is vertically flexible but cannot be bent horizontally. If you need to bypass an obstacle or turn a corner, we recommend soldering a wire with two connectors to your Strip. Soldering ensures a solid connection and minimal voltage drop.

The 120 LEDs 24V 3528 IP20 Strip is fully dimmable. You can vary the intensity of your Strip using a remote control or wall panel with one of our low-voltage dimmers, or you can vary the intensity using your standard wall dimmer in combination with one of our dimmable power supplies.

Looking for a power supply for your 24V Strip? Visit our 24V power supply section here. Consult our page about power supplies to know more about the required power for your LED strip.

This LED Strip is rated IP20, so it offers no water protection. Due to its high intensity, you must install 20-gauge wire if you wish to make connections on this LED Strip.

Specifications:

Brand: CDNLUX
Model: MTL-FP8AEIDJ-120AXX --- XX denotes the type of white WW (Warm White), NW (Natural White), CW (Cool White)
Certification: cULus for Canada and USA E498952

Chip: Epistar 3528 SMD
Chip density: 120 LEDs per meter
Can be cut: All 6 LEDs (50mm)
Length: 25 meters
Maximum Length allowed by the cULus certification and existing electrical codes: 8 meters (see description)
Width: 8mm
Height: 2mm

Voltage: 24V DC
Power consumption: 9.6W/m
Recommended power supply: 12W/m, Class 2 power supply required
Recommended power supply for 8m: 96W, Class 2 power supply required
Typical luminous flux: 800 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: 2700K / 3000K / 3500K / 4000K / 5000K / 6000K
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP20
Suitable environment: For indoor use only
Operating temperature: 40C to -10C
Connections included: No connections included, solder is necessary
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel

Spec Sheet (PDF)