24V 5m iP67 10mm COB LED Strip for Sauna - White

24V 5m iP67 10mm COB LED Strip for Sauna - White

Get a thin linear lighting effect (10mm wide and 5mm thick) that is also elegant and bright with LED Montreal's Continuous Lighting (Dot less) COB LED Strip. UL Certified for use in Canada and the United States, this COB LED Strip is available in four shades of white: 2700K (Warm White), 3000K (Warm White), 3500K (Soft White) and 4000K (Natural White). You can cut your thin COB Strip every 50mm and solder extension wires on the connection pads.  

The 10mm iP67 COB LED Strip can withstand ambient temperatures up to 95 degrees Celsius and does not require heat dissipation. These unique characteristics make it the ideal lighting element for dry or wet saunas. We therefore suggest that you illuminate the underside of your seats with this LED COB Strip. It is not advisable to install it above 150 cm in height in high temperature places. Not being self-adhesive, the package includes 20 silicone clips and proper screws to facilitate installation. You will also find three silicone finishing caps, if you want to cut and waterproof the end of your LED Strip.

This professional-grade COB product has a 3OZ copper circuit board that allows for better lighting consistency and superior heat dissipation. Its high color rendering index (CRI) of more than 90 makes it a product of choice for the demanding customer. The COB LED Strip consumes 10W per meter at 24V DC. The 5m long Strip is equipped with a 1m cable at each end. For added versatility, we'll provide you with a plug-in transformer screw-in adapter in your package. Note that this listing is for the LED Strip only. The power supply is sold separately. Choose the correct power supply depending on total length required and dimming needs. 
 
To create an unparalleled atmosphere in the evening, you will be happy to learn that the COB LED Strip is fully dimmable using a wireless system or even using a standard dimmer thanks to our dimmable 24V power supplies.

We have prepared for you a quick guide on what power supply to use, depending on the length of Strip that you plan on using.

Note that UL certification and the Canadian Electrical Code limits the power supply at 96W max.

Non Dimmable drivers

1 to 3.5 meters : 24V2AETLPSU
3.5 to 5.5 meters : 24V3AETLPSU
5.6 to 7.6 meters : 24V4AETLPSU

Note that if you wish to make your kit dimmable and do not have a dimmer switch available, you can use our K1KIT to control the strip’s intensity.

If you do have a 120V dedicated dimmer switch available, you can use a dimmable driver. Once again, make sure that the driver sits in a dry and cool environment.

Dimmable Drivers

1 to 3.5 meters : 24DIMP48
3.5 to 6.4 meters : 24DIMP80
up to 7.6 meters : 24DIMP96

We want your project to be a success all along the line, which is why we advise you to carefully read the installation guide for Low Voltage LED Strips prior to starting your project.  

Specifications:

Brand: CDNLUX
Certification: cULus for Canada and USA

Chip: COB
Circuit board: 3 Ounces
Can be cut: Every 50mm
Length: 5 meters
Width: 10mm
Height: 5mm

Voltage: 24V DC
Power consumption: 10W/m
Recommended power supply: 12.5W/m, Class 2 power supply required
Recommended power supply for 5m: 62.5W, Class 2 power supply required
Typical luminous flux: 2700K: 840 lm, 3500K: 920 lm, 4000K: 940 lm
Available colors: 2700K, 3000K, 3500K, 4000K
CRI: 90+
Lighting angle: 98.4°
Lifespan: 50 000 Hours

NonAdhesive: (20 installation clips included)
iP rating: iP67
Suitable environment: Suitable for dry, humid environment. Indoor and protected outdoor use.
Operating temperature: 95C to -20C
Connections included: 2 wires (1 meter) on one end and 2 wires (1 meter) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo or a with a dimmable power supply with a 120V AC Dimmer
Heat dissipation: Included