Got a question? Ask Mike!
Mike
Categories

E3-WR 3 in 1 RF + WIFI LED Controller (RGB, RGB+W, RGB+CCT) 1 to 8 Zones Self repeating

E3WR
$44.95
In stock
E3WR
+
Add to wish list
Delivery
Shipping time and rates:
Payment options
Our advantages

E3-WR 3 in 1 RF + WIFI LED Controller (RGB, RGB+W, RGB+CCT) 1 to 8 Zones Self repeating

Experience superior lighting control with the E3-RF LED controller, now featuring a more compact design. Installation is effortless with our tool-free wiring system—just properly skin the wire (10mm) before inserting and clipping the wires securely. This versatile controller works with both 12V and 24V power supplies, fitting seamlessly into your setup. Dual inputs, including one DC barrel jack for plug-in power supplies and two clips for hardwired power supplies, offer flexibility and convenience. Enjoy precise lighting control with stepless dimming for smooth transitions, creating the perfect ambiance every time. Please note, this controller is not compatible with dimmable power supplies. By combining the features of the FUT037, FUT038 and FUT039, the E3-RF controller allows industry professionals to better manage their inventory and provides users the possibility of upgrading their lighting without the need to change controllers.

Want to control your system with your mobile, your tablet or a voice assistant? The E3-WR LED Controller connects directly into your 2.4 GHz Wi-Fi network without additional control module. This controller is intended for the intermediate to advanced user who is comfortable with Wi-Fi technologies and mobile devices. LED Montreal does not offer support for integrating the E3-WR controller to your Google Assistant or Alexa system.

The Multi Zone E3-RF Controller uses 2.4GHz wireless technology, ensuring low power consumption, long signal transmission, and strong anti-interference capabilities. It features an auto-transmitting function with a remote-control range of up to 30 meters. The triple mode allows you to dim and control either a RGB, RGB+W or a RGB+CCT strip effortlessly with the push of a button.

The auto-transmitting function of the E3-RF controllers enables seamless management of long LED runs, such as a 100ft setup, despite the 96W at 24V power supply limit. This feature allows multiple 96W power supplies and controllers to operate on the same frequency and be controlled by a single remote. You can manage all controllers linked to multiple power supplies as one cohesive system, with the flexibility to add almost unlimited controllers per zone for efficient LED installation management. The multi-zone system allows you to have multiple setups on the same remote, with up to four different setups depending on the remote you choose.

The controller is compatible with the following 2.4G RF remote controls: FUT089, FUT092, FUT096, B3, B4, B8. You can match up to 5 remotes with each controller.

Want to control your system with your mobile, your tablet or a voice assistant? Check out our WL5 controller.

Before starting your installation, please unroll the strip. Ensure that the wires at the end are not in contact to avoid any short circuits. Verify that the voltage of the strip and the transformer are compatible. If your strip is a RGB+White, make sure the kelvin of the chosen white is correct. We recommend connecting all the pieces of your set before modifying them. Ensure that all pieces are working properly before assembling them.

To set up the output mode:

Press the "SET" button continuously to switch the output mode. The controller will log out if there's no operation within 3 seconds. Output modes are indicated by the color of the indicator light.

Red Light: RGB Strip
Green Light: RGB+W Strip
Blue Light: RGB+CCT Strip

Linking Code Instructions:

1. Turn off for 10 seconds by unplugging the transformer, then plug everything back in; the LED strip should light up.
2. Briefly press the " | " button on the remote control 3 times within 3 seconds.
3. The lights will flash slowly 3 times to indicate a successful connection.
4. If the connection fails, repeat the steps.

Unlinking Code Instructions:

1. Turn off for 10 seconds by unplugging the transformer, then plug it back in.
2. Briefly press the " | " button on the remote control 5 times within 3 seconds.
3. The lights will flash rapidly 10 times to indicate a successful disconnection.
4. If the disconnection fails, repeat the steps.

Attention:

Turn off the power supply before installation.
Ensure the input voltage matches the device requirements.
Avoid using the device in areas with large metal surfaces or strong electromagnetic waves, as this may affect the remote distance.

Product Specification:

Model No.: E3-WR
Input Voltage: DC12~24V
Output: 6A/Channel
Total Output: Max 12A (4A at 24V or 5A at 12V to comply with Class 2 requirements)
RF: 2.4GHz
Control Distance: 30m
iP Rating: iP20
Working Temperature: -10~40°C
Output Connection: Common anode
Dimensions:100.6mm x 40mm x 17.6mm

Compatible Remotes (sold separately):

3 Zones RF Vertical Remote for all types of LED strips: Y3
4 Zones RF Remote for RGB and RGB+W: FUT096
4 Zones RF Remote for all types of LED strips: FUT092
4 Zones RF Remote for all types of LED strips: C5
4 Zones RF Wall Mounted Panel for for RGB and RGB+W: B3
4 Zones RF Wall Mounted Panel for for all types of LED strips: B4
8 Zones RF Remote for all types of LED strips: FUT089
8 Zones RF Wall Mounted Panel for for all types of LED strips: B8

LED Controllers & Dimmers Specifications
Model No.
E3-WR
Input Voltage
DC12~24V
Output
6A / Channel
Total Output
Max 12A ( 4A at 24V or 5A at 12V to comply with Class 2 requirements )
RF
2.4GHz
Control Distance
30m
iP Rating
iP20
Working Temperature
-10~40°C
Output Connection
Common anode
Dimensions
100.6mm x 40mm x 17.6mm
  • Bestsellers
  • Most Popular
Professional grade products

Canadian and American Certifications

Quantity discounts available

Create an online quote for your project