FUT035 1 to 4 Zones Self repeating RF CCT Variable White LED Controller
1 to 4 Zones Self repeating RF CCT Variable White LED Controller - FUT035 (Upgraded)
This is it! This is the newest technology to control the degree of white of your whole lighting universe. With the RF Multi Zone Remote and CCT Controller - Cool White and Warm White for Adjustable CCT LED Strips from LED Montreal, you can operate every single CCT Adjustable RF LED Strip in your house. Even if you’re a newbie to all of this, you can start shaping your dream house with the CCT Adjustable Strip kits which includes the remote, CCT controller, 24V transformer and the amount of CTT Strips that you need. Add as many CCT controllers as you want and assign them all to one of the 4 available Zones.
The remote control is not the only way to control your CCT Variable White Controller! You can also add the 2.4 GHz WiFi Gateway (sold separately) to control your lights from your phone from anywhere in the world using a WiFi or a mobile 4G connection. The WiFI gateway supports third party voice controls such as Amazon Alexa and Google Assistant. Note that the zone option may not be offered on 3rd party applications and that LED Montreal does not support these interfaces.
About the zones: You will need at least one Controller per zone. Each zone can be composed of Multiple controllers. If you put More than one controller on a Zone, all controllers will all act as one, thanks to the auto-transmitting/auto-synchronizing feature of this CCT Variable White Controller. If one of the controllers is within the range of your remote control, all the other controllers assigned to the zone with will together. Simply put, you could have a kilometer long of Strips and they will be synchronized given there is a controller every 30m. And yes, this is all done wirelessly! This kind of set up lets you use several power supplies for a bigger set up without losing voltage and brightness.
You no longer need multiple remotes for your CCT Variable White Strips. The FUT Controller family now lets you mix different zones of LED Strips on a single remote. Just make sure that you follow these simple rules to do so: There can only be one type of LED Strips per Zone. So, if you put a CCT Variable White Strip on Zone 2, all Strips on Zone 2 must be CCT Variable White and will be operated at once.
Adding on to a Zone is easy!
For a new product or a product that has never been linked before:
- Disconnect the power supply from the controller to switch off the light(s) you want to program.
- Turn the light back on and within 3 seconds; press three times on the ON (│) button of the zone you want to assign (1 to 4) on the remote control.
- The light will slowly flash 3 times to indicate that it was successfully linked.
You can repeat this procedure for each controller that you want to add to your Zone.
Change a light from one zone to another.
If the light you want to add to a zone was previously assigned to a different one, you will first need to unlink that light.
- Identify which zone the light is currently assigned to.
- Disconnect the power supply to turn off the light(s) you want to program.
- Power the light back on and within 3 seconds; press the ON button of the previously assigned zone 5 times quickly.
You can then proceed and program your light according to the add-on procedure outlined above.
Model: FUT035 (Upgraded)
Working Voltage: 12V / 24V DC
Max output: 6A/Channel
Total output Max.: 12A
Working Temperature: -20 to 60C
Maximum Control Distance: 30m
Output Connection: Common anode
Size: 119mm x 37.5mm x 22mm