24V 5m iP65+ RGB+W CCT 5050 LED Strip - 60 LEDs/m (Strip Only)

24V 5m iP65+ RGB+W CCT 5050 LED Strip - 60 LEDs/m (Strip Only)

Standard RGB LED Strips are highly appreciated for their large choice of colors but pose a slight problem when the time comes to produce a white tint. Indeed, they use a mixture of basic colors (Red, Green and Blue) which produces a Cool White with accents that are bluish or even purple.

Traditional RGB + W LED strips, for their part, limit you to a single shade of white.
 
The cULus Listed LED RGB + Variable White Strip (also called CCT) from LED Montreal allows you to obtain the full spectrum of RGB shades IN addition to a variety of whites ranging from 2400K to 6500K. This chromatic prowess is accomplished thanks to the 5050 LED modules which each include 5 distinct lights: Red, Green, Blue, 2400K White and 6500K White. Each RGB + White LED Strip has 300 LEDs over 5 meters or if you prefer, 60 LEDs per meter, which gives it a great light output, regardless of the color chosen.

In short, you can create a cozy atmosphere with an Antique Warm White of 2400K for your intimate evenings, use a Daylight white to prepare dinner and change colors for parties of all kinds.
 
This high quality Strip features our revolutionary iP65+ waterproofing technology. The iP65+ coating protects your strip all around with a silicon sleeve that remains clear and flexible through time. iP65+ strips are ideal for indoor and light duty outdoor usage.
 
The RGB + White LED Strip is available in 24V (unlike traditional Strips which use a voltage of 12V), which allows you to operate this strip with a Class 2 power supply and add extensions without a significant voltage loss. Since this Strip operates on a 24V circuit, DO NOT USE A 12V TRANSFORMER for this Strip. In addition, the Variable White + RGB LED Strip is 14.3mm wide. It is wider than the standard 10mm 5050 strips. It also has 6 connectors compared to 4 for the traditional RGB Strip. Therefore, there is no solderless connector available on the market for this Strip.
 
You must use an RGB + W CCT controller (6 connectors) for this kind of Strip. The two controllers of choice are the FUT039 (combined with the B4 panel and / or the FUT092 remote control) or the very advanced WL5 Wi-Fi which can be controlled via your mobile device / tablet and with the Amazon Alexa or Google Home Assistant systems.
 
If you need to cut and reconnect it, the Strip is cuttable at every 6 LEDs (10cm) and we suggest you solder your wires directly on the Strip. It is good to know that there is a set of 6 wires of about 20cm at each end of your 5m Strip. So you can cut it in half without any problem and without having to solder.

Specifications:

Brand: CDNLUX
Model: MTL-FP12AGIWK-60ARGBWW
Certification: cULus for Canada and USA E498952

Chip: Epistar 5050 RGBW CCT SMD 5 in 1
Chip density: 60 LEDs per meter
Can be cut: All 6 LEDs (100mm)
Length: 5 meters
Width: 14.5mm
Height: 4.25mm

Voltage: 24V DC
Power Consumption: 14.4W/m at 24V on Multi Zone Controller
                                  14.4W/m at 24V on 5 in 1 RF Multi Zone Controller
Recommended Power: 18W/m at 24V on Multi Zone Controller
                                    18W/m at 24V on 5 in 1 RF Multi Zone Controller
Recommended power supply for 5m: 96W, Class 2 power supply required
Typical luminous flux on white: 400 Lumens/m (will slightly vary depending on Kelvin degrees chosen)
Available colors: RGB + Adjustable White (2400K to 6500K)
CRI: 80+
Lighting angle: 120°
Lifespan: 50 000 Hours

Self-adhesive: 3M
iP rating: iP65+
Suitable environment: Suitable for dry, humid environment. Indoor and protected outdoor use.
Operating temperature: 40C to -10C
Connections included: 6 wires (17cm) on one end and 6 wires (17cm) on the other end
Dimmable: Yes, with a low voltage dimmer/remote combo
Heat dissipation: Must be installed on a heat dissipating surface or in appropriate aluminum channel